maximini14 223

I do this too. I measure every bullet. Only those at the proper CBTO go in the ammo box. All others are adjusted until they match. A...

This 👍

The crimp isn't enough to create a pressure spike, at least you shouldn't be crimping that hard. You can get a significant spike if the...

Lee FCD on the way

In an AR, crimp away, it hurts nothing and saves your bullets being hammered back into the case. I ran everything crimped in semi-autos...

I go through my seating depth process and those that aren't exact get set aside. Using my Sinclair Comparator gauge I go back thru and...

On gas guns i use Lee FCD for light crimp. Just insurance from battering bcg heaving bullet into chamber, works well for me. Still very...

I've got to agree. I take precise measurements to produce most accurate load for my 308sfar. I hold seating depth to .0000 tolerance...

Three things we've found by using the LCD with Hammers: (all connected) 1) Significant velocity gain (partly a result of #2) 2) Prevents...

BEFORE you crimp. it's a good idea to cut all the cases to the exact same length. Cases that vary in length will normally crimp with...

I only crimp my auto loader ammo and I do it in a separate step with a Lee factory crimp die.

Most will say, NO. For me, it's my preference to crimp. If full or burst fire it would be a definite YES. Also a cheap way to...

I crimp everything. Learned about it from the guys on the 7STW thread when I purchased my 7STW. There is a bunch of debate, but it has...

When using the lee fed what is your process of setting it up n how much of a crimp? I’ve starting using crimp n have found it helped...

The LEE FCD is adjustable, it comes with set up instructions and they work fine but i have found this a very effective tuning tool,This...