Recent content by haeffnkr

WOW those are some good groups, I hope I can get results like that! I will try 4350 and 4064 with 100 grain BT and get some 120s soon also. I have to break barrel in and all so it will be a couple weeks till I see some good results I hope. Being in somewhat of a hurry and having moderate...

thanks for the help so far. I am not sure what powder I will start with, everyone has a different story, but 4350 and 4895 seem to be a light bullet powders so far. thanks Kevin

I just got my new 260. Heavy Krieger barrel, 28", stainless, with a trued Remington action, in a bedded Sendero stock. My question is I believe the barrel is 1/8 twist and I wanted to start with 100 or 120 grain Nosler BT. Does anyone have experience with these bullets and twist? If so what...

What effect does tempature have on point of impact? If a gun is stable and sighted in and the load is stable and it is summer (not blazing hot) then the same gun and load is left to sit in 30 degree windy overcast temps for an hour or 2 will the POI move? If so how much? BTW -I am assuming...

Thanks for all the responses. Unfortunately the guy already sold the 4000 6x24 and now I am searching the world over for a good used 4000/4200 6x24, matte, again... If anyone has a one, please let me know. thanks Kevin

What are the differences in these scopes? I think the 4000 is older? Which one is better? thanks Kevin

Ian M, Do you think it is inherently more accurate than a standard 25-06? Are the pressures lower than the 223 and 243 wssm's? OR are they any more accurate than the 260 (short action) I am planning to have built? I have also looked into the 223 and 243, the press is good, but everyone else...

I have never seen a VLS lamintated stock, and was wondering if the fore arm area was the same size, or bigger than a H&S Sendero stock? I assume if pillared and bedded this stock would be as accurate as a H&S? Would this Laminate stock ever move enough to alter the POI, through the seasons and...

What stock is more accurate? A laminate with pillars and bedding or a HS type stock with an aluminum block and skim bedded? Or any other options? This if for my 260 project with 700 SA and a Shilen #7 Heavy Varmit barrel? thanks Kevin

<BLOCKQUOTE><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><HR> The worm arrives as a file attachment in an e-mail with a variety of senders and subjects, such as "Hello," and "test." The message body is often technical sounding, imitating the look and feel of an automatically...

These are some good ideas, but I am not sure I want a Savage. I will look into it though. I have bought stuff from Midway though, good experience with them. Is there some restriction on barrels and contours if I was ever to get into some kind of match? Do they have to be contoured to .920 on...

I have another question, what is the most accurate stock? I have always heard that wood moves with the changes in temp and humidity, and this changes the Point of Impact on a rifle? Any ideas on this and my other questions? thanks again, Kevin

OK....I like Nosler BT bullets. What other bullet options are there in the 120 range. What about barrel twist? 1-9 was mentioned. Is the the optimum for 120 grain? What will happen if I try 140 or 100 grain some day? What is the optimum barrel length? longer the better or what? What about...

Do you think those items will get me to my goal of 1 hole groups? What do you look for, good or bad in a used 700 (short?) action? I am not familiar with bedding, I have adjusted 700 triggers (some are better than others...)

But if you goal is just a very accurate rig for under $1000 , then you can have a Rem 700 trued , rebarreled and stocked for about that maybe a little less. <BLOCKQUOTE><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><HR> <HR></BLOCKQUOTE> The above quote was made to me after...