Recent content by bugle-em

Need a starting point for a youth elk hunt. Winchester mdl70 ,30/06,22" barrel, Using Hodges's youth load guide .6 X 51.0 gr max load = 30.6 gr starting load. H4895 min30.6 gr - max51.0 gr 150 gr nosler accubond Fed 215 primers OAL 2.60 off OGIVE Win brass Looking for about 1800 FPS...

Yes I understand all of that I'am starting with a under charged load and I do have a chronograph. I live in Los Angles. Ca and it not easy to get to the range to shoot so if I could get as close to my goal of 1800 Fps / 1000 Fp energy @ 300 Yds on paper. I can go out close as possible to my goal...

Need a starting point for a youth elk hunt. Winchester mdl70 ,30/06,22" barrel, H4895 min30.6 gr - max51.0 gr 150 gr nosler accubond Fed 215 primers OAL 2.60 off OGIVE Win brass Looking for about 1800 FPS and 1000 Ft Lbs energy @ 300 yds that will keep me in nosler specs at 300 yds more...

Need a starting point for a youth elk hunt. Winchester mdl70 ,30/06,22" barrel, H4895 min30.6 gr - max51.0 gr 150 gr nosler accubond Fed 215 primers OAL 2.60 off OGIVE Win brass Looking for about 1800 FPS and 1000 Ft Lbs energy @ 300 yds that will keep me in nosler specs at 300 yds more than...

Look for some help on a light youth load for my 12 year old to elk hunt with. Look to use 150 gr Accubond with H4895 Hodgon say you can take H4895 max charge listed less 60%(.6) X max load and adjust up from there. Would like to see MV 2300 fps which will take him to 300 yds with 1000 ft #...

Bushnells One Mile Arc Conx found some threads from 2014 last year show and again this year 2015 One Mile Arc Conx (blue tooth) range finder with talk with kestral AB or smart phone to send real time data to range finder for proper hold over and windage?Havent seen much press on them did any...

Trigger mod just did it polish the face and removed some materal to make the safety work properly still not the same as my Jewell's . Looking at Jared or Timney .to get to 1.5# with little to no creep any one running the Jared or the factory up grade trigger?

New 6.5-284 Norma getting high pressure signs with low velocity? Using Lapua brass, H4350, Berger 140VLD ( gun is reamed for VLD ) FED 215 M , 0.001 neck tension, + +.010 Jammed, Seening pressure signs over 47.5 gr H4350 2756 FPS means on 6 shot group 0.230 group @ 100yds and 30 rounds down...

Looking to buy SEEKINS PRECISION rings 34mm 0.92" low 4 cap screw. Can not find in stock need some HELP?gun)

found a used gun rem 721 action labled 6.6 - 284 lapau?

Thinking of droping a QUARTER on a Darrell Holland ART scope and shooting system. A coin toss on Nightforce or Schmidt and Bender, 3-12x42 or 3-15x50 in FFP. It will be on a 6.5-284 for deer/antelope hunting. is it worth the money????gun)

Looking to HARD CHROME a 721 rem action.Dont know what it will do to tolerances,and if finish will be unform.Need some input and references. Thank you.gun)