Rate of twist for 6.5x284 Norma

elkslayerjc

Active Member
Joined
Mar 13, 2011
Messages
34
Im looking to build a long range rilfe in the 6.5x284 Norma caliber and I was wondering what is a recomended rate of twist I should choose. I plan on using an accubond or a berger bullet, somewhere in the 120-130 grain range. I also plan on insltalling a pacnor barrel in 26-28 in length. Any info would be great..... Thanks
 
I would cHose a 1:8 twist. While it may not be needed for the 120-130wt you are thinking about, it will stabilize the 140 VLD bullets which are the best ballistic performers in this cartridge.
 
I built a 6.5x.284 last year and I went with an 8 twist. I shoot the 140 bergers but from what I understand lots of guys run them with an 8.5 twist just fine or even a 9. I think if your going to run 120-130's I would go with 8.5. Hope this helps.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top