Ballistic app not same as the shot? Help

What speed are you using for muzzle velocity?
These calculators are very good but every input matters, you need to make sure everything is correct if you want an even close solution. Garbage in garbage out.
There is a ton of good youtube videos on learning how to use a calculator.
 
Yes need to go back to the beginning and start from scratch. Thanks for everyone's feedback will post after starting over.
there is a chance your 6br does require 1 moa at 150 yards but that means your mv is approx 2390 which is on the really slow side and factory ammo in my experience is loaded fairly hot.

but for your solution to be .5moa the MV you were using is in the 2900 range which is out to lunch also
 
Using StrelokPro set for 6.5C 142gr @ 2761mv 100 yard zero I get under the Calculate
.63 MOA 1 inch turret 3/4

When I load the 6mmBR 105 scenar-l into my StrelokPro with 100 yard zero and scope height 1.8 inches

150 yards CALCULATE and

.75 MOA 1.2 inch Turret 6/8

Is that close to what you get?
 
Using StrelokPro set for 6.5C 142gr @ 2761mv 100 yard zero I get under the Calculate
.63 MOA 1 inch turret 3/4

When I load the 6mmBR 105 scenar-l into my StrelokPro with 100 yard zero and scope height 1.8 inches

150 yards CALCULATE and

.75 MOA 1.2 inch Turret 6/8

Is that close to what you get?
What velocity on the BR
 
The most critical points to an accurate firing solution will be Muzzle Velocity, Bullet weight and BC and weather.
Weather won't matter much at that distance but farther out it does.

for 6BR with that bullet at MV of 2700 at a distance of 150 yards I get a correction of .7 moa using my current weather.
 
Ok I can't find the scope in the scope list. She has a 5-50x56 Ten mile in MOA. They have the scope in MRAD but not in MOA? Can I input her scope somehow ? How do I get ahold of Boris?
That really doesn't matter it's just if you are going to look at the reticle portion of the app. Post some screen shots of ur inputs on Strelok and I can probably tell you what's wacky
 
Here's what it tells us for 150 yards. She was shooting 146 yards and had to go 8 clicks up
 

Attachments

  • 4EF803EF-C92A-4871-8BED-E7F5313CAF0A.png
    4EF803EF-C92A-4871-8BED-E7F5313CAF0A.png
    83.8 KB · Views: 30
Measured the diameter of scope and diameter of bolt. Took half of each of those measurements added to the distance between the scope and bolt. Dia. Of scope was 1.718 so half of that was .859 bolt was .698 so half of that was .349 and the distance between them was 1.125 add together and get 2.333 could it be because of the 20" barrel? I see no place to input length?
 
Top