Hammer Hunter Load Data, (See page 1, Post 8)

[GimpyPaw]

Must of missed it, where is the spreadsheet?

Page 1, post #8 is it's normal home, but apparently they are having "technical difficulties"

eta: Sorry, uploaded the wrong file. Here is the latest HH load data I had saved before they took it down

 

[GLTaylor]

Must of missed it, where is the spreadsheet?

Due to some technical difficulties it is only posted on the Hammertime Forum at present.
Hope to get the problems sorted out shortly and re-post the data here again.

 

[GLTaylor]

OK folks, the Hammer Hunter Load Data is posted again.
My hard drive crashed and this is a resurrected post.
We may well have lost some data?
Check for the loads YOU had posted. IF YOURS IS MISSING, PLEASE RE-POST.
Thanks. Sorry for the glitch.
G

 

[just_jon]

204 Ruger 26" 12 twist
31 Hammer Hunters
2X Norma brass bumped .002"
Fed 205M
2.257" COAL
.004 neck tension
1/8 T crimp

IMR 8208 XBR:
28.1: 4,137 fps ES 65 SD 25 Grp 1.24"
28.4: 4,208 fps ES 25 SD 10 Grp .64"
28.7: 4,288 fps ES 20 SD 7 Grp .27"
29.0: 4,342 fps ES 14 SD 6 Grp .21"
29.3: 4,370 fps ES 30 SD 12 Grp .37"

No signs of excess pressure. Groups were shot at 100 yards.

 

[just_jon]

300 WM Ladder
100 HH
24" Factory Rem 1:10 twist
3X Peterson Long bumped .002" 1/4 T FCD
Fed 215M

Reloder 16
76.0: 3532
76.5: 3541
77.0: 3554
77.5: 3583
78.0: 3632
78.5: 3688
79.0: 3669
79.5: 3683
80.0: 3686
80.5: 3694

Given that I'm getting 3500 from the 151AH, I'm expected these to run a bit faster. I do like the upper node.

 

[just_jon]

6mm Rem
55HH
26" T/C 1:10 twist
2x R-P bumped .002" 1/8 T FCD
Fed 210M

W760
51.0: 3990 fps ES 84 SD 42 Grp 1.45"@ 100 yards
51.5: 4064 fps ES 18 SD 8 Grp .65"
52.0: 4086 fps ES 11 SD 5 Grp .42"
52.5: 4086 fps ES 108 SD 45 Grp 1.23"
53.0: 4177 fps ES 43 SD 22 Grp .96"

IMR 3031
43.0: 3966 fps ES 12 SD 5 Grp .39"
43.5: 4016 fps ES 43 SD 18 Grp 1.23"
44.0: 4089 fps ES 11 SD5 Grp .56"
44.5: 4087 fps ES 2 SD 1 Grp .21"
45.0: 4152 fps ES 9 SD 3 Grp .32"

All three shot groups. No signs of excess pressure. I'm going to reshoot IMR 3031 44.5 and 45.0 to validate results. I definitely like what I'm seeing with this powder.

 

[GLTaylor]

300 WM Ladder
100 HH
24" Factory Rem 1:10 twist
3X Peterson Long bumped .002" 1/4 T FCD
Fed 215M

Reloder 16
76.0: 3532
76.5: 3541
77.0: 3554
77.5: 3583
78.0: 3632
78.5: 3688
79.0: 3669
79.5: 3683
80.0: 3686
80.5: 3694

Given that I'm getting 3500 from the 151AH, I'm expected these to run a bit faster. I do like the upper node.

JUST JON,
Try Varget if you have it. Much faster top end.

 

[just_jon]

JUST JON,
Try Varget if you have it. Much faster top end.

I've get plenty and will give it a try. Thanks for the tip and thank you for maintaining this data.

 

[ENGUNEER]

Just tuning in. Please keep it coming.

 

[just_jon]

300 WM Ladder
100 HH
24" Factory Rem 1:10 twist
3X Peterson Long bumped .002" 1/4 T FCD
Fed 215M

Reloder 16
76.0: 3532
76.5: 3541
77.0: 3554
77.5: 3583
78.0: 3632
78.5: 3688
79.0: 3669
79.5: 3683
80.0: 3686
80.5: 3694

Given that I'm getting 3500 from the 151AH, I'm expected these to run a bit faster. I do like the upper node.

Forgot to include COAL. It is a short stubby 3.025"

 

[just_jon]

6mm Rem
55HH
26" T/C 1:10 twist
2x R-P bumped .002" 1/8 T FCD
Fed 210M

W760
51.0: 3990 fps ES 84 SD 42 Grp 1.45"@ 100 yards
51.5: 4064 fps ES 18 SD 8 Grp .65"
52.0: 4086 fps ES 11 SD 5 Grp .42"
52.5: 4086 fps ES 108 SD 45 Grp 1.23"
53.0: 4177 fps ES 43 SD 22 Grp .96"

IMR 3031
43.0: 3966 fps ES 12 SD 5 Grp .39"
43.5: 4016 fps ES 43 SD 18 Grp 1.23"
44.0: 4089 fps ES 11 SD5 Grp .56"
44.5: 4087 fps ES 2 SD 1 Grp .21"
45.0: 4152 fps ES 9 SD 3 Grp .32"

All three shot groups. No signs of excess pressure. I'm going to reshoot IMR 3031 44.5 and 45.0 to validate results. I definitely like what I'm seeing with this powder

COAL 2.705"

 

[Scythe]

338SS 24" Rock Creek 1:9.4
175 HH
4x (ADG) Sherman Brass
MagnetoSpeed

N540
Rem 9.5

56.0 3041
57.0 3095
57.3 3110
57.6 3121
58.0 3138
58.3 3146

N540
Fed 210 Match

57.0 3103
57.3 3120
57.6 3128
58.0 3166
58.3 3111
58.6 3127

 

[Scythe]

338SS 24" Rock Creek 1:9.4
205 Power Hammer (Shock)
4x (ADG) Sherman Brass
MagnetoSpeed


N540
FED 210

55.5 2897
56.0 2779
56.5 2797
57.0 2823
57.5 2850
58.0 2876

N540
FED 215M

55.5 2787
56.0 2817
56.5 2815
57.0 2869
57.5 2875
58.0 2904

 

[bushwackr]

Hello all. I've tried getting the load data spreadsheet but it will not open. I'm trying to find data for 270wsm with 116 ah.