I am moly coating my bullets so my loads might be useless to you, also I have not shot these enough to verify my primer choice. I still need to shoot over the chrony more while switching back and forth between WLR and WLRM. I will shoot some more +.1 and -.1 gr as well.
175 SMK moled, 64.8 gr H4350, WLR primer, Win case, COL 2.829" and touching the lands, AV 3011 ES 11 @ temp 89 deg F
180 HIB moled, 64.1 gr H4350, WLR primer, Win case, COL 2.857" and touching lands, AV 3016 ES 19 @ temp 89 deg F
Barrel length 25.1" measured from face of action to crown.
Also a load I am sure of when the barrel was a deer hair less than 26" before it was set back rechambered and recrowned:
190 SMK molyed, 68.5 gr RL 22, WLRM primer, Win case, COL 2.871" .003" into the lands, AV 2964 ES 10 @ 62 deg F
RL22 is extremely consistent from around 20 deg, about as cold as is gets here, till temps get well over 90 deg, when velocity gain per deg is 5+ FPS.