Ziess rapid z 600 sub tensions

[.222 ND]

Can anyone tell me the sub tensions for a rapid z 600 3.5-10x50 conquest. I tried to find my answer on the internet and had no luck. I'm looking for the correlating Moa number that would go with each yardage mark. Thanks

 

[Roughrice]

I read somewhere that the RZ 600 is good for the common non-magnum calibers like 243, 270, 30-06, etc...

Someone measured and came up with this:
200 - "0"
300 - 2.09 moa
400 - 4.45 moa
500 - 7.33 moa
600 - 10.47 moa

It sounds reasonable to me according to other scope manufacturer's BDC subtensions.

Hope this helps!

 

[.222 ND]

Thanks

 

[.222 ND]

I made a chart for a Hornady 150 grain 308 sst at 3040 fps with a 200 yard zero. It pretty much matches the reticle.

 

[Roughrice]

Yep.
It may work out really well.
I use bdc reticles on a couple of hunting rifles and have tweaked my loads a wee bit to match up with reticles. They were still in the accuracy node and worked out well.
When they are already a close match... its easy to do.

Best of luck!
Let us know how it runs!

 

[.222 ND]

I was going to put it up for sale, then my brain went down the rabbit hole…

 

[wildbillb02]

Download their app and plug and play

 

[BigGriz]

Download their app and plug and play

Yeah before you get rid of it, download the Zeiss Hunting app and input your caliber. I'm a fan of the reticle and app, they work.

 

[BigGriz]

Here is the Zeiss app with those parameters you listed above. The elevation and weather will change a little but this will get you close. The recommended magnification is 9.5x.