• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED WANTED - 6.5 Rem Mag ammo

I wondered about that, but haven't researched the ability to do that. I do hand load so maybe I could accomplish that.

Is that ammo still in production?
 
Bill's Sporting Goods, Claremore, Oklahoma, has some 6.5 Rem Mag brass.

918-341-5388
Bill Lowe is the owner.

Quite certain they will ship it to you.

Tell Bill I sent ya.

Regards,
Roger Carlton
 
.264 (6.5mm) rifle bullets - Nosler - SPEER - Hornady
.264 (6.5mm) rifle bullets
Nosler - SPEER - Hornady

SPEER 140-gr. Spitzer
4-boxes of 100-ct. = $22-each ($23.99 Midway)
1-partial of 46-ct. = $10

Hornady 140-gr. Spire Points
4-boxes of 100-ct. = $23-each. ($24.99 Midway)
1-partial of 96-ct. = $21.

Hornady 129-gr. Spire Points
5-boxes of 100-ct. = $23-each ($24.99 Midway)

Nosler Partition 140-gr. Spitzers
4-boxes of 50-ct. = $33-each ($34.99 Midway)

I can easily fit 4-boxes in one $5.80 US Mail Priority Flat Rate Box.
That's usually the cheapest way to ship.

Postal money orders or certified Cashiers Checks are good.
PayPal: add 3% (That's what they charge me if you use PayPal.)

CHRIS GEGERE
7 VISTA CT.
RIVERTON, WY 82501-9269

(307) 856-6427 home
(307) 851-6011 cell

[email protected]

I have .264 WINCHESTER Magnum brass too. (NEW)

http://www.longrangehunting.com/forums/f41/264-6-5mm-rifle-bullets-nosler-speer-hornady-119766/
 
http://www.longrangehunting.com/for...-brass-new-350-ct-free-s-h-if-buy-all-119811/

.264 WINCHESTER MAGNUM BRASS (NEW) 350-ct. - FREE S/H if buy all.
http://www.midwayusa.com/find?newcategorydimensionid=20224
Midway USA (above) wants $36.99 for a 50-ct. bag. = 74-cents a piece.

ALL NEW - UNFIRED
.264 WINCHESTER MAGNUM brass
Some Made by R-P (Remington-Peters)
and WINCHESTER.

(5) bags of 50-ct. R-P: $32-each. = 65-cents a piece. :D

(3) 20-ct. WINCHESTER brass in WINCHESTER ammo boxes: $13 each = 65-cents each :D

(2) 20-ct. R-P brass in Remington ammo boxes: $13 each = 65-cents each.

Postal Money Orders and Certified Cashiers Checks are good.
PayPal: add 3% (That's what they will charge me if you use PayPal.)

CHRIS GEGERE
7 VISTA CT.
RIVERTON, WY 82501-9269

(307) 856-6427 home

(307) 851-6011 cell

[email protected]
 
Here's my 6.5 rem. mag. she about 14 pounds without the burris I had on it. About 125 rounds or less shoot in it. I have more than 200 new pieces of brass plus about 100 used brass. The weapon is custom made by a smith here in Henry County in Va. It's about 14lbs without the big scope I had on it. I was thinking about selling it and going to something else. Its a great shooter, used it mostly for hunting power lines here, my longest shot was a little over 500 yds with it with 120 grain bullets. I know your are looking for brass but I just wanted to show you the gun. Thanks for looking at it.
 

Attachments

  • 6.5 pics 2.jpg
    6.5 pics 2.jpg
    96.9 KB · Views: 8
  • 6.5 pics 3.jpg
    6.5 pics 3.jpg
    95.2 KB · Views: 6
  • 6.5 pics 4.jpg
    6.5 pics 4.jpg
    84.9 KB · Views: 8
  • 6.5 pics 5.jpg
    6.5 pics 5.jpg
    94.7 KB · Views: 9
  • 6.5 pics.jpg
    6.5 pics.jpg
    97.2 KB · Views: 6
Ah she's a beauty, and a Cinderella caliber for sure. I wish the gun makers would resurrect her with a longer barrel and a magazine that would allow for seating bullets closer to the lands.

Ours is an 18.5" barrel but not very accurate. I've been working a lot of loads and powders and haven't been able to get consistent 1 inch groups. Got er pillar bedded and now trying a pressure point at the for arm.

Thanks for your pics.
 
I saw some factory 6.5 Rem Mag ammo on a shelf the other day. Probably new old stock but it was there......was also $65!

I wouldn't pay that but if someone wants the name of the shop drop me a PM and I'll tell you.
 
Just in case other people catch the thread.

Here's where I found it:
http://www.planogun.com/

Seems like a pretty good place and the people are friendly; which is nice because so many shop employees think the money comes before the conversation/service/help!
 
Check with Hendershot's in Hagerstown , MD. They do custom loading.

I see it in a few shops in PA. What are you willing to pay / box ? I can let you know what I see.
 

Recent Posts

Top