Usefull stuff to make when you have the time

fiftybmg

Well-Known Member
Joined
May 16, 2016
Messages
287
Location
Johannesburg, South Africa
A holder for shellholders. Dowel rods are bamboo chopsticks. Hangs on the wall.

shellholder_stand.jpg


A loading tray for 500 Jeffery. Holds 100.

500-100.jpg
 
Let us know the final weight on that. I might have to do that to my Boyd's.
I just weighed the complete rifle (with out scope) yesterday and it came out right on 7.0 pounds even-- the barreled action is a 24" win 70 super shadow wsm -- but I haven't weighed just the stock alone yet-- i installed pillars but haven't finished the rest of the bedding job yet.
 
Last edited:
When we built our house, the kitchen floor is hickory of several different widths. So decided to cut a piece down for a loading block. DANG is this stuff hard as heck! Even my cutoff saw didn't like it. The planks came with 7 coats of poly so it never has to be resurfaced. It still looks as good as the day it was put down 16 years ago.
IMG_2374.JPG
 
I like the shell holder holder. I shudder at the idea of needing to load 100 .500 Jeffrey's.....
Lighten up your Boyd's laminate stock-- still in process View attachment 189184
Nice work!
I went at it a bit differently, I hollowed out the buttstock with spade bits (& an extension) and long shank carbide burrs, and I dropped a 2 flute end mill into the forearm channel taking material out of the sides and the bottom while not disturbing the top edges of the channel. I forget the weight results from each step, but the scoped Howa Mini is a shade over 6.5 lbs. loaded.
 
I built a 6.5saum last 2 weeks. I could have built it in 3 days but then what would I do. I also painted a bald eagle in watercolor. Starting a fox and kingfisher now.
Shep
 
I like the shell holder holder. I shudder at the idea of needing to load 100 .500 Jeffrey's.....

Nice work!
I went at it a bit differently, I hollowed out the buttstock with spade bits (& an extension) and long shank carbide burrs, and I dropped a 2 flute end mill into the forearm channel taking material out of the sides and the bottom while not disturbing the top edges of the channel. I forget the weight results from each step, but the scoped Howa Mini is a shade over 6.5 lbs. loaded.
Seen/heard of people doing the spade bit into the butt thing, also heard of nightmares of the bit not being true and wandering off center-- mine adds some aesthetics (as long as you like the look) -- inspiration came from the coyote outback laminated rifle from around '08

Mine is actually the super shadow- win lists it as 6 pound 12 oz stock, I replaced the plastic trigger guard with an aluminum one, and the 7.0 pounds is with the 2 piece alum pic rails atached and the mbm brake so I'm guessing the weight is a few ounces less than stock but it feels much sturdier than the plastic stock
 
Oh yeah, my first stock got a bit, shall we say, thin on one side? Enough so that I started over. The bits drilled true right up until I needed the extension to go as deep as I wanted to. The joint between the extension and the bit is a mite wobbly and on the second stock I had to 'steer' the bit around a bit to keep it going on center.
Some might say that I cheated a little, I dislike DBM's hanging out of the stock, but Howa Mini's come only that way. So I shortened the mag to as flush as I could easily get it. That brought the round count down to 3 total.

I mostly posted because I want to see what others are up to. OP, like the thread a lot!
 
Oh yeah, my first stock got a bit, shall we say, thin on one side? Enough so that I started over. The bits drilled true right up until I needed the extension to go as deep as I wanted to. The joint between the extension and the bit is a mite wobbly and on the second stock I had to 'steer' the bit around a bit to keep it going on center.
Some might say that I cheated a little, I dislike DBM's hanging out of the stock, but Howa Mini's come only that way. So I shortened the mag to as flush as I could easily get it. That brought the round count down to 3 total.

I mostly posted because I want to see what others are up to. OP, like the thread a lot!


I pickedup the stock for $80 so I figured - wth might as well play a bit-- the Boyd's stock for the blind mag rifles arent as thick so I ended up having to shorten the internal box-- 3 rounds will fit but the bolt wont cycle over them so it's now a 2+1 -- the original barrel is not free floated so I hope this helps tighten groups up a bit.

I've always made my own loading blocks and shell holder caddies but mine are just utilitarian pine-- I love to look at nice woodworking projects.
 
Last edited:
I went at it a bit differently, I hollowed out the buttstock with spade bits (& an extension) and long shank carbide burrs, and I dropped a 2 flute end mill into the forearm channel taking material out of the sides and the bottom while not disturbing the top edges of the channel. I forget the weight results from each step, but the scoped Howa Mini is a shade over 6.5 lbs. loaded.
Can you post pictures of the finished work?
 
Lighten up your Boyd's laminate stock-- still in process View attachment 189184
OK, weighed the stock last night-- as it sits, no butt pad or sling studs but finished the aluminum pillars and bedding it is 28 ounces--I could have taken a bit more weight out of the front below the barrel, but that would be a bunch more work for probably an ounce or less in weight drop, might be able to drill up into the palm swell but once again, risk messing up what I have already done for an ounce or less, I'm done with it other than adding a grind to fit limb-saver, studs, and finishing the wood with true-oil
I kept the "hunk" of laminate that I cut out of the butt and am saving it for some knife handle scales for a future project--- I have found laminate wood scales to be a good material for hunting knives
I did find a broken screw head on the front weaver rail section while the scope was off, so I'm going to fix that-- it had a very slight wiggle to it--hopefully between the screw, a good bed job, and a totally free floated barrel it will tighten up its groups for me now as I really want to like the 7wsm cartridge.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top