toader
Well-Known Member
Looking to sell my semi-custom 300 RUM built off a Sako 75 action. The rifle is in excellent condition and only has about 60 rounds down the barrel . It's a consistent .75" shooter with factory ammo!!!
Pictures will be posted later tonight.
Here are the specs:
*Sako 75 stainless barreled action with older style bolt shroud (I got this bolt shroud new to replace the "Key Concept" locking bolt shroud)
*Spiral fluted bolt by Kampfeld Customs
*Near Mfg. 20 MOA stainless base installed by Greg Tannel of Gre-Tan Rifles. He drilled & tapped the receiver
square to bore and installed base perfectly!!
*McMillan Sako 75 stock that has been pillar/skim bedded by GA Precision(GAP) = 13 5/8" LOP, painted olive drab, standard fill weight, 1/2" Decelerator pad
*Slim-Line muzzle brake installed by Dave Bruno for Accu-Flite Arms. The brake is perfectly fitted to match barrel contour & looks seemless. Excellent in taming recoil!!
*Sako 75 trigger tuned to 2.5#
*Sako 75 factory stainless "BDL" style bottom metal
REDUCED TO $1825 & WILL INCLUDE THE BADGER RINGS!!
Pictures will be posted later tonight.
Here are the specs:
*Sako 75 stainless barreled action with older style bolt shroud (I got this bolt shroud new to replace the "Key Concept" locking bolt shroud)
*Spiral fluted bolt by Kampfeld Customs
*Near Mfg. 20 MOA stainless base installed by Greg Tannel of Gre-Tan Rifles. He drilled & tapped the receiver
square to bore and installed base perfectly!!
*McMillan Sako 75 stock that has been pillar/skim bedded by GA Precision(GAP) = 13 5/8" LOP, painted olive drab, standard fill weight, 1/2" Decelerator pad
*Slim-Line muzzle brake installed by Dave Bruno for Accu-Flite Arms. The brake is perfectly fitted to match barrel contour & looks seemless. Excellent in taming recoil!!
*Sako 75 trigger tuned to 2.5#
*Sako 75 factory stainless "BDL" style bottom metal
REDUCED TO $1825 & WILL INCLUDE THE BADGER RINGS!!
Last edited: