• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

SOLD/EXPIRED Semi custom 7mm Rem Mag, bighorn SR3, helix 6 barrel, ag composites, tt special

GISHunter

Well-Known Member
Joined
Dec 29, 2016
Messages
470
Location
Colorado
This rifle has been sitting in the safe for over 2 years not fired, its time to move it on. It's a semi-custom 7mm Rem Mag on a Bighorn SR3 action. The barreled action was ordered and all chambering work was done by Brimstone Gunsmithing. I bought the AG composites stock and bedded the action myself. Its not professional but its pretty clean.

Rifle Specs are:

Action – Bighorn/Zermatt SR3 LA, Spiral Bolt, standard feed lips, trim tang, DLC coated

Barrel – Helix 6 Precision, 26", 1-8" twist, 3 port brake, 7 mm Rem Mag

Trigger – Trigger Tech Special

BDL – Hawkins Oberndorf BDL

Stock – AG composites Carbon All Terrain (CAT), bedded. I ordered this stock without the raised cheek piece when it was still called the CAT stock. I believe that is now called the Sportsman.

Rings – Hawkins long range Hybrids 30mm low, epoxied onto receiver, 20 moa rail also included

Extras – Bighorn action wrench and standard bolt face also included.

Weight – 7 lb 9oz as is

Overall its in pretty good condition. The bolt has some "spotting" discoloration on it, nothing major. The stock has some scratches here and there and a chip in the paint by the safety lever. I also had to relieve the bolt handle area in the stock and never repainted it. Never bothered me because you can't see it unless the bolt is open, but easy to paint over. The bottom edge of the trigger guard has a few light marks, most likely from living in the safe.

I mostly shot factory ammo though it. Multiple groups under 1 moa. I did very brief load development with 160 gr partitions and shot sub 1/2 MOA. I loaded some 175 ELDx to test with the faster twist but never got around to it. My notes put round count right around 80.

I'll ship it in a plastic hard case. Comes with bighorn action wrench and a standard bolt head as well in case you want to switch cartridges ever. The Hawkins hybrid rings are epoxied in place to ensure no movement. The 20 moa rail will also be included incase you want to throw that on. I also have a set of dies and limited brass if your interested.

$2600 Shipped to your FFL, CONUS.

Mainly interested in selling to fund a new build. But possible trades include:
Terminus Apollo lite action
Altera arms carbon hunter stock, SA
Proof Research .284, 1-8.4 twist, 24", sendero contour blank
 

Attachments

  • 2A90B10A-F631-4ED6-8200-4F0CAC7AD0A8.jpeg
    2A90B10A-F631-4ED6-8200-4F0CAC7AD0A8.jpeg
    1.6 MB · Views: 590
  • 72EA4173-C4BA-4E71-BCBD-845032B6F47C.jpeg
    72EA4173-C4BA-4E71-BCBD-845032B6F47C.jpeg
    1.5 MB · Views: 565
  • 2D3DD60D-FB3A-402B-83D6-86FEF1D4C5F5.jpeg
    2D3DD60D-FB3A-402B-83D6-86FEF1D4C5F5.jpeg
    2 MB · Views: 483
  • 2BC13D4A-B9B7-4F8F-A8F0-4039E0FFEFB5.jpeg
    2BC13D4A-B9B7-4F8F-A8F0-4039E0FFEFB5.jpeg
    2.5 MB · Views: 480
  • 45C536C1-26E0-4959-BADB-9A81EFC15C94.jpeg
    45C536C1-26E0-4959-BADB-9A81EFC15C94.jpeg
    1.8 MB · Views: 538
  • BC104094-F4BB-47B8-9C5A-CB481399BFB5.jpeg
    BC104094-F4BB-47B8-9C5A-CB481399BFB5.jpeg
    2 MB · Views: 600
  • 245EDB72-2ACA-41BE-BC21-A2ED62740243.jpeg
    245EDB72-2ACA-41BE-BC21-A2ED62740243.jpeg
    2 MB · Views: 575
  • A965CBF2-C189-4CD3-A851-AB50F2E1F751.jpeg
    A965CBF2-C189-4CD3-A851-AB50F2E1F751.jpeg
    914 KB · Views: 498
  • 6A8FE9AC-F76A-455B-BC43-A4137C3BA6B6.jpeg
    6A8FE9AC-F76A-455B-BC43-A4137C3BA6B6.jpeg
    824.9 KB · Views: 580
Last edited:
If I wasn't in the middle of buying a house I'd be all over the barreled action. I have a TL3 SA that I love. GLWS.
 
Top