dolomite_supafly
Well-Known Member
After getting a bunch of requests I have decided to do another run of these.
$20 shipped via PayPal.
I have sold hundreds of these. Always a positive feedback. 100% guaranteed.
http://forum.accurateshooter.com/threads/savage-bolt-lift-kits.3982490/
www.longrangehunting.com
If you would like to place an order send me a PM with your mailing address as well as how may you would like.
Once I get your mailing address and the number you are ordering I will give you the PayPal address to send the payment.
Doing it this way makes it easier for me to keep track so I can get them shipped out in a timely manner. I will not get your address from PayPal and will only use the address you provide via PM. I do this because some addresses in PayPal are old addresses.
Every kit sold comes with a 100% money back guarantee. If they do not work, you do not like it or just don't want it, return it and I will refund 100% of your money including shipping which is $1.
The kit is made in the US on a CNC from 303 stainless so they will not rust. The ball bearing is a Rockwell C80 so they will not wear and should last forever. Makes the normally rough Savage bolt lift feel smoother. These do not require any modification to the gun. No need to trim or space the BAS. These are ready to go, you do not need to buy anything other than a 1/4" allen wrench to remove the screw at the rear of the bolt.
These WILL work on the Lapua Magnum action, any model 1X/11X with an allen wrench screw at the rear of the bolt without the cocked indicator.
![[IMG]](/proxy.php?image=https%3A%2F%2Fforum.snipershide.com%2Fdata%2Fattachments%2F284%2F284081-de48aa2777c3fb74b695b32402d0a0dc.jpg&hash=31d80de31d7d9fb3831bc28d9d931d36 "[IMG]")
They will ***NOT*** work on Savages with the cocking indicator in the bolt or the Axis or Fusion or any Savage with flat tip screw slot at the rear of the bolt. If you have a F or J action these will not work. If you have any doubt you can measure the screw at the back of the bolt. If the threaded part of that screw is ~.500" these should work.
$20 shipped via PayPal.
I have sold hundreds of these. Always a positive feedback. 100% guaranteed.
http://forum.accurateshooter.com/threads/savage-bolt-lift-kits.3982490/
Savage bolt lift kits
I bought one of these a couple of weeks ago and they really work, cut the lift effort in half.Plus really easy to install
If you would like to place an order send me a PM with your mailing address as well as how may you would like.
Once I get your mailing address and the number you are ordering I will give you the PayPal address to send the payment.
Doing it this way makes it easier for me to keep track so I can get them shipped out in a timely manner. I will not get your address from PayPal and will only use the address you provide via PM. I do this because some addresses in PayPal are old addresses.
Every kit sold comes with a 100% money back guarantee. If they do not work, you do not like it or just don't want it, return it and I will refund 100% of your money including shipping which is $1.
The kit is made in the US on a CNC from 303 stainless so they will not rust. The ball bearing is a Rockwell C80 so they will not wear and should last forever. Makes the normally rough Savage bolt lift feel smoother. These do not require any modification to the gun. No need to trim or space the BAS. These are ready to go, you do not need to buy anything other than a 1/4" allen wrench to remove the screw at the rear of the bolt.
These WILL work on the Lapua Magnum action, any model 1X/11X with an allen wrench screw at the rear of the bolt without the cocked indicator.
They will ***NOT*** work on Savages with the cocking indicator in the bolt or the Axis or Fusion or any Savage with flat tip screw slot at the rear of the bolt. If you have a F or J action these will not work. If you have any doubt you can measure the screw at the back of the bolt. If the threaded part of that screw is ~.500" these should work.
