HuntnID
Well-Known Member
So I'm selling a rifle that I got on here amd never got around to shooting, partly because I'm a bit stingy on using my gun powder at the moment and partly because I'm really more of a 338 guy. Here is the description.
Model 700 RR Prefix Action
- Single shot plate fitted to magazine well and spot-tigged into place
- PTG Oversized 1-piece bolt to fit trued-up raceway
- M16 Extractor
- 8-40 rail screws
- Nightforce steel base 20 MOA
- Standard Timney Trigger
Manners EH1
- began life as a short action single shot
- recoil lug relief for LA was added and the SA filled with Devcon
- SA action screw/pillar relief was filled with Devcon
- pillar bedded
- barrel channel is for a Proof Sendero
- ADL trigger guard
- 4" Pic rail
Barrel
- Bartlein Sendero Contour
- 28"
- 10-twist
- MBM Beast brake
- "Do your part 3000" was engraved on the top of the barrel as a parody/inside joke
- Small rub mark from user error in scope ring selection
- 82 rounds
Fireform Barrel
- 30 cal 10-twist Rem 700 Sendero contour take-off barrel that was brand new
- 25" length with a Cooley brake
- 105 rounds
All metal was Cerakoted with a Tungsten/Black mix.
Also included
- 90 pieces of 2x fired brass (private headstamp 338 Lapua RWS brass)
- Custom Hornady Sizing Die
- Forster Bench-rest seater die
All metal work was done by Dave Young of Young's Gunsmithing in Sand Coulee, MT
I got it for $1600 and I'll get it to your FFL for $1600 shipped. I'm open to trade offers so let's hear those too.
www.longrangehunting.com
Model 700 RR Prefix Action
- Single shot plate fitted to magazine well and spot-tigged into place
- PTG Oversized 1-piece bolt to fit trued-up raceway
- M16 Extractor
- 8-40 rail screws
- Nightforce steel base 20 MOA
- Standard Timney Trigger
Manners EH1
- began life as a short action single shot
- recoil lug relief for LA was added and the SA filled with Devcon
- SA action screw/pillar relief was filled with Devcon
- pillar bedded
- barrel channel is for a Proof Sendero
- ADL trigger guard
- 4" Pic rail
Barrel
- Bartlein Sendero Contour
- 28"
- 10-twist
- MBM Beast brake
- "Do your part 3000" was engraved on the top of the barrel as a parody/inside joke
- Small rub mark from user error in scope ring selection
- 82 rounds
Fireform Barrel
- 30 cal 10-twist Rem 700 Sendero contour take-off barrel that was brand new
- 25" length with a Cooley brake
- 105 rounds
All metal was Cerakoted with a Tungsten/Black mix.
Also included
- 90 pieces of 2x fired brass (private headstamp 338 Lapua RWS brass)
- Custom Hornady Sizing Die
- Forster Bench-rest seater die
All metal work was done by Dave Young of Young's Gunsmithing in Sand Coulee, MT
I got it for $1600 and I'll get it to your FFL for $1600 shipped. I'm open to trade offers so let's hear those too.
Rem 700 300 Lapua AI
So I'm selling a rifle that I got on here amd never got around to shooting, partly because I'm a bit stingy on using my gun powder at the moment and partly because I'm really more of a 338 guy. Here is the description. Model 700 RR Prefix Action - Single shot plate fitted to magazine well and...
