WSMDRT
Well-Known Member
Pieced this little guy together from some gathered parts.
Stainless LH Action from Bullet Central (2022)
Timney Elite Hunter @ 1.5lb
Action was 308 bolt, sent to LRI for extractor opened up to magnum, flute bolt and flute shroud. Skeletized bolt handle with carbon knob(Lumley)
Barrel was purchased on LRH take off from CDL SF
Ti Pro Titanium brake
Stocky's M50 Carbon Stock M5
PTG bottom metal, Accurate Mag (plan to switch to hawkins flush metal and mag)
Gunsmithing done by Custom Gunsmithing Boyce, VA
Talley light weight rings
Burris Signature HD 3-15
Load development started with 178gr eld and 180gr Elite Hunters. 68.5gr of Superformance both right at 2900. ADG brass.
Stainless LH Action from Bullet Central (2022)
Timney Elite Hunter @ 1.5lb
Action was 308 bolt, sent to LRI for extractor opened up to magnum, flute bolt and flute shroud. Skeletized bolt handle with carbon knob(Lumley)
Barrel was purchased on LRH take off from CDL SF
Ti Pro Titanium brake
Stocky's M50 Carbon Stock M5
PTG bottom metal, Accurate Mag (plan to switch to hawkins flush metal and mag)
Gunsmithing done by Custom Gunsmithing Boyce, VA
Talley light weight rings
Burris Signature HD 3-15
Load development started with 178gr eld and 180gr Elite Hunters. 68.5gr of Superformance both right at 2900. ADG brass.
