Reloading info for berger 250 hybrid using h1000 for 338 lapua

Bradu

Active Member
Joined
Nov 26, 2012
Messages
33
I am picking up a Barrett 98b from the FFL tomorrow and I can't really find any data on this combo. I just want a good starting point so I can start load development this week. I'm using Federal primers and Lapua brass.
 
I have 89.0gr of h 1000. Loaded by mcwhorter for my rifle. Haven't tried it yet but he said it shoots good. .37in at 10 3 shot groups
 
I got my quickload program figured out and made some progress. It showed with the bullet seated with a OAL at 3.830 I could run 96 grains and stay below max pressure. I worked up to it and past it looking for pressure signs and looks like I have a node around 95.5 grains. It's pushing the bullet 3050 fps which I'm pretty happy with. Now it's a matter of shooting a few groups to see what works best.
 
Warning! This thread is more than 10 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top