QL anyone

chad

Well-Known Member
Joined
Jun 28, 2011
Messages
462
Location
Layton Utah
Can someone run a quick load check for me. For a 260 Remington Hornady case federal magnum primer 45.2 grains of reloader 23 and 130 grain game changer
 
130gr GameChanger isn't in QuickLoad so you'd have to provide the length of the bullet in addition to the other data.

In general, the more precise the data input the better the estimated output data. Variations in chamber dimensions, barrel bore, cartridge neck tension and a few other things can cause QuickLoad estimates to be different than your actual results.

For best estimate, you'd need to provide;
  • Barrel Length
  • Case Volume
  • Air Temperature
  • Cartridge Overall Length
  • Case Trim to Length
  • Powder and Powder Charge Weight

If you would be satisfied with a just a general estimate of the resulting pressures and velocities then at a minimum you'd have to provide;

  • Barrel Length
  • Cartridge Overall Length
  • Powder and Powder Charge Weight
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top