ELR Researcher
Well-Known Member
- Joined
- Aug 11, 2009
- Messages
- 1,536
For Sale – New RPA .50 BMG action + New XLR Evolution BMG Chassis +
New Rangemaster Precision Arms/RPA GBMF (.50 BMG) single shot action (including factory RPA trigger) and New XLR Evolution BMG Chassis plus:
Murphy full length, zero MOA Pic rail (New, shown installed)
Custom rear adapter with Pic rail to fit Pic-rail-mounted accessories, e.g., monopod or the included 5" wide bench rest rider/plate (new, shown installed, easily removed)
RPA factory trigger guard with screws and pillar bed blocks (New, not shown but included)
XLR 5.5" front Pic rail (New) - https://xlrindustries.com/collections/accessories/products/evolution-picatinny-rail
XLR-supplied Ergo palm shelf, installed (New, easily removed) - https://xlrindustries.com/collections/accessories/products/palm-shelf-grip-upgrade
XLR front bench rest bag plate, 3" wide (New) - https://xlrindustries.com/collections/accessories/products/bench-rest-guide-plate
XLR folder adapter (New, not installed) - https://xlrindustries.com/collections/accessories/products/push-button-folding-adapter
RPA action (factory rifle) link - http://rpadefence.com/wp-content/uploads/2014/11/ULTRA-A5-50cal-Data-Sheet.pdf - detailed actionphotos at the Accurate-Mag review done at the SHOT Show 2013 (16 Jan 2013) - http://www.elr-resources.com/page16.html
XLR Evolution BMG chassis link - https://xlrindustries.com/collections/chassis/products/evolution-bmg-chassis
XLR Extreme BMG buttstock link - https://xlrindustries.com/collections/buttstocks/products/extreme-bmg-butt-stock
This rifle was never final assembled. I have another identical setup that meets my current needs – the original plan was to build two rifles (different, non-.50 BMG, chamberings). Weight as shown, including action, is 24 lbs.Length as shown is 49.5".
NOTES:
1. Because the XLR cheekpiece is a wrap over with vertical sections on both sides, it must be removed to extract the action bolt. It is included and can be re-installed if desired.
2. The XLR cheekpiece is a very tight fit to the adjacent chassis section.In removing it the chassis was dinged (pics available for serious buyers) – easily covered with paint or marker.
3. Please do not ask for more photos as everything is very securely packed up and ready to ship.
Only sold as a "set" - $2695 plus actual cost to ship (USPS ground, fully insured). Cost to replace (actual current prices), less shipping: $3368. Suffice it to say, I paid $2500 for the action alone – the British pound has taken a big hit since then.
Transfer must be conducted through your FFL and the action shipped to the FFL – everything else will ship direct to the buyer. The FFL needs to e-mail me a copy of his license. After I confirm the FFL is current, and the customer-provided shipping address matches the ATFOnline database, and your check or MO clears my bank, I will promptly ship.
Please address detail questions to [email protected] .Thanks for considering purchase of this excellent gear.
New Rangemaster Precision Arms/RPA GBMF (.50 BMG) single shot action (including factory RPA trigger) and New XLR Evolution BMG Chassis plus:
Murphy full length, zero MOA Pic rail (New, shown installed)
Custom rear adapter with Pic rail to fit Pic-rail-mounted accessories, e.g., monopod or the included 5" wide bench rest rider/plate (new, shown installed, easily removed)
RPA factory trigger guard with screws and pillar bed blocks (New, not shown but included)
XLR 5.5" front Pic rail (New) - https://xlrindustries.com/collections/accessories/products/evolution-picatinny-rail
XLR-supplied Ergo palm shelf, installed (New, easily removed) - https://xlrindustries.com/collections/accessories/products/palm-shelf-grip-upgrade
XLR front bench rest bag plate, 3" wide (New) - https://xlrindustries.com/collections/accessories/products/bench-rest-guide-plate
XLR folder adapter (New, not installed) - https://xlrindustries.com/collections/accessories/products/push-button-folding-adapter
RPA action (factory rifle) link - http://rpadefence.com/wp-content/uploads/2014/11/ULTRA-A5-50cal-Data-Sheet.pdf - detailed actionphotos at the Accurate-Mag review done at the SHOT Show 2013 (16 Jan 2013) - http://www.elr-resources.com/page16.html
XLR Evolution BMG chassis link - https://xlrindustries.com/collections/chassis/products/evolution-bmg-chassis
XLR Extreme BMG buttstock link - https://xlrindustries.com/collections/buttstocks/products/extreme-bmg-butt-stock
This rifle was never final assembled. I have another identical setup that meets my current needs – the original plan was to build two rifles (different, non-.50 BMG, chamberings). Weight as shown, including action, is 24 lbs.Length as shown is 49.5".
NOTES:
1. Because the XLR cheekpiece is a wrap over with vertical sections on both sides, it must be removed to extract the action bolt. It is included and can be re-installed if desired.
2. The XLR cheekpiece is a very tight fit to the adjacent chassis section.In removing it the chassis was dinged (pics available for serious buyers) – easily covered with paint or marker.
3. Please do not ask for more photos as everything is very securely packed up and ready to ship.
Only sold as a "set" - $2695 plus actual cost to ship (USPS ground, fully insured). Cost to replace (actual current prices), less shipping: $3368. Suffice it to say, I paid $2500 for the action alone – the British pound has taken a big hit since then.
Transfer must be conducted through your FFL and the action shipped to the FFL – everything else will ship direct to the buyer. The FFL needs to e-mail me a copy of his license. After I confirm the FFL is current, and the customer-provided shipping address matches the ATFOnline database, and your check or MO clears my bank, I will promptly ship.
Please address detail questions to [email protected] .Thanks for considering purchase of this excellent gear.
