-
You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.
We offer multiple options to become a Supporting Member here.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
SOLD/EXPIRED McMillian A-3 pillar bedded for Impact S/As w\adj cheekpiece
- Thread starter Sending156s
- Start date
Help Support Long Range Hunting Forum
What's the barrel channel?
Sending156s
Well-Known Member
M24, but I've put a MTU in it also. So it's good for using as a hunting rifle with a CF Rem/Var to using as a competition contour. Hope this helps. Lynn
J Bake10
Member
Sir, Do you happen to know the weight of the stock ? Also what type of bottom metal did you have in it ? THANK YOU GREATLY FOR THIS INFO.
Sending156s
Well-Known Member
I'll weigh it when I get home. I've used the Hawkins M5 DBM & the Hawkins Hunter with the 3 rd mags that fit flush. This has been my do all stock as I have several Impact S/As. I have it & a couple of rifles for sale to hopefully finance another project.
Sending156s
Well-Known Member
It weighs 3 lbs 2 ozs on a postal scale. At least a lb of that weight is the KMW hardware in the adjustable cheekpiece. Goes up/down & right/left.
I took a couple of minutes to put a barreled action into it to show you the fit of bottom metal and you can see what it looks like as a full rifle.
Impact 737r & Bartlein M24 CF.
I've also used it with heavy SS competition barrels. If a barrel isn't shooting the way I expect I put it in this stock. If it still doesn't shoot right I've eliminated bedding as the problem.
Thanks for looking….
I took a couple of minutes to put a barreled action into it to show you the fit of bottom metal and you can see what it looks like as a full rifle.
Impact 737r & Bartlein M24 CF.
I've also used it with heavy SS competition barrels. If a barrel isn't shooting the way I expect I put it in this stock. If it still doesn't shoot right I've eliminated bedding as the problem.
Thanks for looking….
Attachments
Sending156s
Well-Known Member
J Bake10
Member
Thank you Sir , very nice set up you have, I have a Manners that is the same weight. Looking for something in the 2 lb range or less , thank you again for your troubles.
Sending156s
Well-Known Member
No troubles at all. Going through that reinforces I might not should sell. I have lightweight Manners & heavy Manners & Foundations, but that is the only stock that will do it all.
I love Manners. Having an adjustable cheekpiece is important. As a shooter in the USMC we used to find a piece of foam the right size then duct tape over it. Now all Ops shooters have the adjustable cheekpiece.
For Manners I recommend either the LRH or the EH1 with the side plate that is adjustable. Manners' service & quality are good as it gets. Give Mr. Jim a call on the service line & get setup with exactly what you want. Wishing you & yours a blessed day.
Just remembered, it's not long until thier Black Friday sale. That's typically 20% off. If you are former military they have a great discount for veterans.
J Bake10
Member
Thank you for the info , have a great week !
