• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Load for 300 rum with hornady 212 eldx

imohunting

Active Member
Joined
Jan 9, 2013
Messages
35
I'm going to try up a load for a 300 rum with the 212 hornady eldx bullets and wondered what powder and charge guys are having good luck with. Thanks for the help!!
 
I load for 300 WM and 30-378, which are on either side of the RUM in case capacity. I'd try H1000, Retumbo, RL-26, and possibly RL-33. The 33 might be a smidgin too slow for getting max velocity though.
 
I use 88.5 grains of retumbo in mine. I seat the 212 at .095" off the lands in Norma brass sparked by a F215M. I drive them right at 3100 fps for <.5 MOA with no pressure signs.
 
I am working on a load using an HbN coated 212 ELD-X, but using R33. So far my tests have shown promise with 95.0, 95.5, and 96.0 grains using virgin Norma brass and a GM215M primer. All charges tested with .010" jump and no pressure signs and easy extraction. Just need to tweak seating depth and retest for best accuracy. Naked bullets will probably use 1-2 grains less powder for the same pressure.
95.0-3098avg, SD7
95.5-3116avg, SD12
96.0-3136avg, SD7

Reuben
 
Warning! This thread is more than 8 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top