RickInFL
Active Member
I use a Lee single stage press for my .270 Win rifle cartridges and have been using my Dillon balance beam scale to measure the H4831 powder charges, rummaging through my reloading closet this morning I found and forgot I had also bought a Lee Pro Auto-Disk powder measure with the press but while reading through the Lee Reloading Manual I see they don't have H4831 listed on their measuring disk page in the back of the book.
Is the Lee Pro Auto-Disk not capable of measuring extruded powders such as H4831?
Edited...
Oh never mind ... I found it, was looking at the wrong page.
Is the Lee Pro Auto-Disk not capable of measuring extruded powders such as H4831?
Edited...
Oh never mind ... I found it, was looking at the wrong page.
