• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

HS Precision 6mm Creedmoor barrel

rharfo

Well-Known Member
Joined
Jun 24, 2012
Messages
1,203
Location
Country Road Take Me Home
For sale: used -650 rounds fired HS Precision 6mm Creedmoor barrel. Came off a HTR model. Heavy contour with flutes and their H brake. Green cerakote.
OAL is 28, barrel is 26. See photos for measurements.
$100 shipped lower 48.
 

Attachments

  • 60CF0524-0B8E-415D-9C52-FEAB1B4F2AB3.jpeg
    60CF0524-0B8E-415D-9C52-FEAB1B4F2AB3.jpeg
    1.7 MB · Views: 37
  • E53F2E87-21D4-484B-BADB-DFEF2FA01C24.jpeg
    E53F2E87-21D4-484B-BADB-DFEF2FA01C24.jpeg
    1.4 MB · Views: 39
  • B614BB6C-BDB8-4F18-AFFA-56CB9E9C7EC3.jpeg
    B614BB6C-BDB8-4F18-AFFA-56CB9E9C7EC3.jpeg
    2.1 MB · Views: 36
  • 74585529-CEB0-4423-B49C-DA81CA0F0EB6.jpeg
    74585529-CEB0-4423-B49C-DA81CA0F0EB6.jpeg
    2.1 MB · Views: 36
  • 58BD1F2B-D5AB-4F07-9508-141C08EB2D0D.jpeg
    58BD1F2B-D5AB-4F07-9508-141C08EB2D0D.jpeg
    2.2 MB · Views: 35
I looked online and I couldn't find anything about the action but looks like a possibility of a Winchester 70 and it wasn't a 6 creedmoor
 
Good Morning,

Thank you for contacting us. The thread pitch is the same as Remington - 1-1/16 (16 TPI).

The nose of an H-S bolt is tapered whereas a Remington bolt nose is squared so the barrel would need to be modified to make the Remington bolt work properly.

If you need additional information, please let us know.

Best Regards,

Kayleen Henderson
p: 605-341-3006 ext. 150
d: 605-718-8608
e: [email protected]

FAMILY OWNED AND OPERATED SINCE 1978

PROUDLY DESIGNED, ENGINEERED, AND
MANUFACTURED IN THE USA

1301 Turbine Drive | Rapid City, SD | 57703
Visit us at www.hsprecision.com




The information in this communication is proprietary and strictly confidential. It is intended solely for the use of the individual or entity named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, any dissemination, distribution, copying or other use of the information contained in this communication is strictly prohibited. If you have received this communication in error, please first notify the sender immediately and then delete this communication from all data storage devices and destroy all hard copies.





-----Original Message-----
From: WordPress <[email protected]>
Sent: Saturday, July 30, 2022 7:15 AM
To: Website Info <[email protected]>
Subject: External New Message from the website: "Barrel thread pitch"

CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

From: Rob Harford <[email protected]>
Subject: Barrel thread pitch

Message Body:
Hello,
I have a take off barrel from a HTR. What is the third pitch? Will the barrel fit a Rem 700 without alterations?
Thanks
Rob
Penn Hunter Firearms

--
This e-mail was sent from a contact form on HS Precision (https://hsprecision.com)
 
The H-S bolt has a cone breech bolt design. This was done to distinguish the H-S actions from the basically similar Remington M700 actions.

If you are a DIY person, it's certainly feasible to make the adjustments using a lathe. Otherwise a gunsmith's services will be required.

;)
 

Recent Posts

Top