What kind of neck runout are you seeing with the Hornady iron press when used with Hornady custom grade dies and lock n load bushings?
I see lots of movement of the top of ram in all directions at the top of the stroke depending on how I push on the handle. The coax has almost none so it has not been a concern up to this point as my experience has been with Forster up to this point. I don't have a Concentricity gauge to check the rounds.
I see lots of movement of the top of ram in all directions at the top of the stroke depending on how I push on the handle. The coax has almost none so it has not been a concern up to this point as my experience has been with Forster up to this point. I don't have a Concentricity gauge to check the rounds.