OG-danimal
Well-Known Member
Anyone tried this combo out of a 6.5prc? Curious your thoughts and recipe if willing to share
Thanks!
Thanks!
H4831sc and the 124HH
- Thread starter OG-danimal
- Start date
Help Support Long Range Hunting Forum
The Badger
Well-Known Member
Not a 6.5 PRC, but the 124 HH and H4831sc is a great combo in my 6.5 Sherman. I'm using 60.2 grains and Fed 210GM primers at 3,410 fps. Showed slightly better accuracy than RL-23 in my rifle. Performed well on five whitetails last season.
From my experiences so far with hammers in 3 different cartridges, it's pretty hard to find a powder that won't work (within reason). I have used H4831 in my 300PRC (which is on the fast side for 300 PRC powders) and easily got 1/2MOA. I then tried N570 (super slow) and also got 1/2MOA. I've been playing with them in my 25-06 and 270Win as well and have been super happy. I was working up a 270Win load with the 124gr. and N560 over the weekend and I'm getting excellent results so far. I just don't think you can go wrong if you pick a reasonably appropriate powder speed and have reasonable call fill %. I prefer to stay between 95-102% as that is where I have often found the best results in my rifles.
X2 above, for 6 rifles so far
Mine did almost 3500 fps with N560
A 6.5 PRC? What length barrel?
OG-danimal
Well-Known Member
Dang! Mind sharing your load and neck tension?
OG-danimal
Well-Known Member
Worked up to 56.0 gr 4831sc today. Shooting 3100 fps with adg brass and Cci-br2 primers. Seems like plenty of room to increase my charge, so I'll be doing that and reporting back
I am going to try RL26 starting at 58 grains and going up.
OG-danimal
Well-Known Member
Hit pressure at 58gr today, speed still chillin at 3100fps. Groups are under 1 MOA from 56.5 up to 58gr though.
That being said I'm going to stick with my N560, at 3275fps
That being said I'm going to stick with my N560, at 3275fps
