Gunsmith NEEDED in Alabama or specializing in AICS


Active Member
Oct 30, 2012
Dear Forum,

My normal gunsmith is being flaky because of his 9-5 is very busy and I need a gun finished!

Here is what I have and what I need final assembly on. Can anyone please point me in the right direction for anyone that has lots of experience with 700 actions and AICS platforms?

- AICS Dark Earth Non Folder
- Stiller Tac300 Action 700 Clone 300 winmag
- Hart Barrel (Unchambered, Unthreaded) Heavy Varmint, Helical Fluted
- NO TRIGGER PURCHASED, Want a jewell at 2/2.5
- No Brake Purchased yet, want a Holland.

I want the gun to have the machine work done and final assembly completed; ready for optics and ready to rock.

Can anyone help me or point me in the right direction.


I read your post on SH too, just ran out of time to post. Do you recall the thread Chad Dixon made in the Gunsmithing section about CNC inletting chassis systems for a stress free, yet unbedded surface? Sounds like this might be right up your alley.

Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.