- Joined
- Dec 21, 2009
- Messages
- 882
Entry is extremely quick and easy - CLICK HERE TO ENTER - then just enter your first name and email address.
THE PRIZE
Manners Composite Stocks is proud to introduce our new line of hunting stocks called the Elite Hunter Series and will be giving away one stock per month for 5 months here at LRH! (see the models down below)
1 Winner Per Month For 5 Months
Street Value - $569
Prize Donor:
www.mannersstocks.com
See the contest rules down below in the next post.
A lot of work went into the development for this line of stocks. The ultimate goal was to be as light as possible but still maintain the ruggedness, stability, accuracy and ergonomics of the rest of our lineup. To accomplish this we went back to the drawing board. The composite industry in the past has always been driven by aerospace technology, but for the past few years there has been a lot of advancements in the wind energy market. They are now makingoff shore carbon fiber wind turbine blades that are over a 110 meters in length. What we did was take some of these advancements in materials and ideas and developed a new process for this series from lay-up to fill. To start, all the stocks in this series had to have a 100% carbon fiber shell. The second part was to develop a super light fill that would still hold up to any magnum caliber that you could throw at it. To accomplish this we still had to use our full size 9/16" pillars. Lightweight fill in non-critical areas and heavy fill where needed. The heavy fill is what adds weight quickly, so we developed a process that can precisely control the amount of this material and only place it where it is most needed, example – recoil lug/front pillar area and web area in-front of the trigger. We started this series with a total of 5 new stocks; 4 remington/winchester based and 1 Tikka lite based stock. All will come standard with a full inlet, ½" or 1" decel pad and a solid painted finish of your choice, the exception to this will be the tikka t3 based stock, instead of pillars it will come with a hardened stainless steel recoil lug made by KRG. Based on the design and inlet, this line up weighs in anywhere from 22.5 to approximately 26.5 ounces. There will be more to come over then next few months, which will include a youth stock, a safari stock and other versions for various action inlets.
The MCS-EH1 stock was designed for the long-range hunter. Depending on the inlet, the standard weight with a ½" decel pad is 26 to 27 ounces. The forend is 1.75" wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #8 barrel which is about 1.125″ diameter at the tip of the stock. The grip on the stock is more of a vertical tactical style, that is longer than standard with a small palm swell and overall smaller grip than say our MCS-T4 stock. The bottom of the butt has a flat that is about ¾" wide that is true running with the sides of the stock. This allows it to ride very straight and true when using a rear bag. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions. * On a side note, this stock will cross over to our tactical side, and be offered with a standard shell/weight and be available in molded in colors/camo.
The MCS-EH2 stock was designed to be more of a mountain rifle stock for guys wanting to use larger objective optics. Depending on the inlet, the standard weight with a ½" decel pad is 25 to 26 ounces. The forend is 1.5" wide at the tip and rounded on the bottom which is wide enough to accept a #4 to #5 barrel. This stock has a high cheek piece to get your head up a nice palm swell. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions.
The MCS-EH3 is more of a traditional mountain rifle stock like our MCS-SL. Some of the main differences between the two are, we added a little higher cheek for use with a larger objective scopes, it has a lengthened grip to give you more control and the feel of a full size stock and it is ambidextrous for you lefties. Depending on the inlet, the standard weight with a ½" pad is 24 to 25 ounces. The forend is 1.5" wide at the tip and rounded on the bottom which is wide enough to accept a #4 to #5 barrel. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions.
The MCS-EH4 stock was designed for the guys that have been asking for a short compact stock. This stock is based off our popular MCS-T. Some of the main differences between the two are, the forend on this stock is 3.25" shorter, the width is only 1.6" at the tip which is wide enough to accept up to a 5 ½" contour which is basically a heavy remington profile barrel. This stock has a high cheek to get your head up and a nice palm swell. Depending on the inlet, the standard weight with a ½" pad is 24 to 26 ounces. It is designed for Rem 700 styles actions, but can be had for Winchester, Savage, Howa and other actions. * On a side note, this stock will cross over to our tactical side, and be offered with a standard shell/weight and be available in molded in colors/camo.
The MCS-EHT TIKKA stock is more of a mountain rifle stock designed just for the Tikka T3 Lite. Depending on the inlet, the standard weight with a ½" decel pad is 22 to 24 ounces. The forend is 1.3" wide at the forend and rounded on the bottom. It is wide enough for the factory heavy barrel which is about a #3 contour. This stock will also come with a hardened stainless steel recoil lug made by KRG.
THE PRIZE
Manners Composite Stocks is proud to introduce our new line of hunting stocks called the Elite Hunter Series and will be giving away one stock per month for 5 months here at LRH! (see the models down below)
1 Winner Per Month For 5 Months
Street Value - $569
Prize Donor:
www.mannersstocks.com
See the contest rules down below in the next post.
A lot of work went into the development for this line of stocks. The ultimate goal was to be as light as possible but still maintain the ruggedness, stability, accuracy and ergonomics of the rest of our lineup. To accomplish this we went back to the drawing board. The composite industry in the past has always been driven by aerospace technology, but for the past few years there has been a lot of advancements in the wind energy market. They are now makingoff shore carbon fiber wind turbine blades that are over a 110 meters in length. What we did was take some of these advancements in materials and ideas and developed a new process for this series from lay-up to fill. To start, all the stocks in this series had to have a 100% carbon fiber shell. The second part was to develop a super light fill that would still hold up to any magnum caliber that you could throw at it. To accomplish this we still had to use our full size 9/16" pillars. Lightweight fill in non-critical areas and heavy fill where needed. The heavy fill is what adds weight quickly, so we developed a process that can precisely control the amount of this material and only place it where it is most needed, example – recoil lug/front pillar area and web area in-front of the trigger. We started this series with a total of 5 new stocks; 4 remington/winchester based and 1 Tikka lite based stock. All will come standard with a full inlet, ½" or 1" decel pad and a solid painted finish of your choice, the exception to this will be the tikka t3 based stock, instead of pillars it will come with a hardened stainless steel recoil lug made by KRG. Based on the design and inlet, this line up weighs in anywhere from 22.5 to approximately 26.5 ounces. There will be more to come over then next few months, which will include a youth stock, a safari stock and other versions for various action inlets.
The MCS-EH1 stock was designed for the long-range hunter. Depending on the inlet, the standard weight with a ½" decel pad is 26 to 27 ounces. The forend is 1.75" wide at the tip and rounded to a beaver tail that is flat and wide enough to accept a #8 barrel which is about 1.125″ diameter at the tip of the stock. The grip on the stock is more of a vertical tactical style, that is longer than standard with a small palm swell and overall smaller grip than say our MCS-T4 stock. The bottom of the butt has a flat that is about ¾" wide that is true running with the sides of the stock. This allows it to ride very straight and true when using a rear bag. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions. * On a side note, this stock will cross over to our tactical side, and be offered with a standard shell/weight and be available in molded in colors/camo.
The MCS-EH2 stock was designed to be more of a mountain rifle stock for guys wanting to use larger objective optics. Depending on the inlet, the standard weight with a ½" decel pad is 25 to 26 ounces. The forend is 1.5" wide at the tip and rounded on the bottom which is wide enough to accept a #4 to #5 barrel. This stock has a high cheek piece to get your head up a nice palm swell. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions.
The MCS-EH3 is more of a traditional mountain rifle stock like our MCS-SL. Some of the main differences between the two are, we added a little higher cheek for use with a larger objective scopes, it has a lengthened grip to give you more control and the feel of a full size stock and it is ambidextrous for you lefties. Depending on the inlet, the standard weight with a ½" pad is 24 to 25 ounces. The forend is 1.5" wide at the tip and rounded on the bottom which is wide enough to accept a #4 to #5 barrel. It is designed for Rem 700 style actions, but can be had for Winchester, Savage, Howa and other actions.
The MCS-EH4 stock was designed for the guys that have been asking for a short compact stock. This stock is based off our popular MCS-T. Some of the main differences between the two are, the forend on this stock is 3.25" shorter, the width is only 1.6" at the tip which is wide enough to accept up to a 5 ½" contour which is basically a heavy remington profile barrel. This stock has a high cheek to get your head up and a nice palm swell. Depending on the inlet, the standard weight with a ½" pad is 24 to 26 ounces. It is designed for Rem 700 styles actions, but can be had for Winchester, Savage, Howa and other actions. * On a side note, this stock will cross over to our tactical side, and be offered with a standard shell/weight and be available in molded in colors/camo.
The MCS-EHT TIKKA stock is more of a mountain rifle stock designed just for the Tikka T3 Lite. Depending on the inlet, the standard weight with a ½" decel pad is 22 to 24 ounces. The forend is 1.3" wide at the forend and rounded on the bottom. It is wide enough for the factory heavy barrel which is about a #3 contour. This stock will also come with a hardened stainless steel recoil lug made by KRG.
Last edited:
