SOLD/EXPIRED Defiance Anti shorty 308 - Bartlein, Manners, B&A

[estes640]

Looking to sell my shorty 308 so I can build an NRL hunter rifle. Smithed by Shaen Meagan. Specs are as follows:

Defiance Anti SA - 308 bf
19" Bartlein CFW Barrel - #4 contour, threaded 5/8"-24, 36 rds
Manners eh-2 elite tac - moolah paint scheme, bedded for defiance anti/ruckus
Hawkins BDL bottom metal and follower
Bix and Andy Tacsport (can keep trigger and subtract $210 from rifle price)

Also have defiance action wrench if needed $105 with the rifle

Asking $2675 shipped for rifle, no optic or suppressor

Target is three rounds of Hornady black 168 a max off a bag. Rifle is a hammer.

I did have to relieve a little material in the barrel channel (about 3" on the left side) with 400grit sand paper. Taped everything off and got only what I needed. Can't see it with the BA in, but I was going to paint it after a while. Barely scratched the surface of the fill. Just wanted a little more clearance to the barrel

 

[cowboy1911]

Looking to sell my shorty 308 so I can build an NRL hunter rifle. Smithed by Shaen Meagan. Specs are as follows:

Defiance Anti SA - 308 bf
Bartlein CFW Barrel - #4 contour, threaded 5/8"-24, 36 rds
Manners eh-2 elite tac - moolah paint scheme, bedded for defiance anti/ruckus
Hawkins BDL bottom metal and follower
Bix and Andy Tacsport (can keep trigger and subtract $210 from rifle price)

Also have defiance action wrench if needed $105 with the rifle

Asking $2675 shipped for rifle, no optic or suppressor

Target is three rounds of Hornady black 168 a max off a bag. Rifle is a hammer.

I did have to relieve a little material in the barrel channel (about 3" on the left side) with 400grit sand paper. Taped everything off and got only what I needed. Can't see it with the BA in, but I was going to paint it after a while. Barely scratched the surface of the fill. Just wanted a little more clearance to the barrel

What is the barrel length? Thanks!

 

[estes640]

Knew I forgot something! 19"

 

[Buzzsaw]

what rimfire are you shopping for?

 

[estes640]

what rimfire are you shopping for?

Not shopping for a rimfire. Going to put together an NRL hunter rifle/something more suited for longer range shooting

 

[shootnpoke]

What wgt is the rifle without scope?

 

[estes640]

What wgt is the rifle without scope?

Erroring on the side of conservative, should be roughly 6.75lbs bare rifle.

Not sure where my wife "put up" my postal scale so I can't get an exact weight

 

[Zinterrante]

LOF?

 

[estes640]

LOF?

? Length of pull?

Should be standard 13.5-13.75"

 

[Zinterrante]

? Length of pull?

Should be standard 13.5-13.75"

My apologies. Yes length of pull.

Thank you

 

[matt4284]

who did the machine work or was it a prefit and what is the round count twist rate

 

[estes640]

who did the machine work or was it a prefit and what is the round count twist rate

10 twist. Everything else is in the ad. Shaen Meagan of Shaen rifles did the work, not a prefit. Round count is 36rds.

 

[matt4284]

I just pm you

 

[estes640]

SOLD