Due to circumstances "painfully" I am offering for sale a "Custom" rifle package.
$4500. Final price drop.
(Without scope)
Rifle chambered in 7mm Blaser Magnum "Rogue" 37 Deg. improved.
Pierce Right Hand "Featherweight" Ti action w/ Ti bolt. bolt is Nitrided
Proof Research Carbon Sendero, 1-8 twist, 26" with Pierce Ti muzzle brake.
Precision Stockworks 'Rifleman" stock,
By McMillan carbon, edge fill, Right hand.
Jewell HVR trigger 1-1/2#
Murphy Precision 10 moa Ti scope rail.
Scope rail has been bedded to the action.
1 set of Hawkins 30mm long range hybrid rings, top ring bubble level.
PTG Rem style BDL bottom metal.
Harris Bipod w/pod lock installed.
Paint: Kryptek Typhon Camo Cerakote, by Branden at Custom Gun Coatings.
Rifle was built by Rhian (Bigngreen) at High Country Precision.
Metal Cerakote by Rhian, in Tungsten w/ black accents.
Whidden custom dies, neck bshng style sizer, & micrometer style seater
shoulder bump gage - Rhian built with the chamber reamer.
PTG chamber reamers, 1) HSS reamer & 1) Carbide reamer. with Go Gage
Montana Extreme cleaning rod.
Pelican 1750 hard case, with cut foam.
Norma Brass, 20 pcs. once fired to form,
515 pcs. "New" brass. That's a bunch!!!
500 Berger EOL 195gr. (100 of these are HBN coated)
Approx. 350 Hornady 180 ELDM.
Weight: Rifle is approx 6.7#
Rhian ran the 195's to 2880 during preliminary load work, with 64.0gr RE-26
Rifle shoots exceptionally well !!
(see attached photos)
may be able to get 2900-2950 with N570 ?
Fireforming loads shot tiny groups for me.
I also have Berger load data for 180 & 195's
"all ya need is primers & powder"
PRICE >>> $4500 Rifle accessories shipped insured to your FFL.
First "I'll take it" listed here or by pm or text conversation gets it. I'll go by time stamp to be fair.
I also have several more photos that wont load on here for some reason that I can text.
PM me with any questions.
there are a couple threads on this site regarding 7mm Blaser Mag. Search button.
$4500. Final price drop.
(Without scope)
Rifle chambered in 7mm Blaser Magnum "Rogue" 37 Deg. improved.
Pierce Right Hand "Featherweight" Ti action w/ Ti bolt. bolt is Nitrided
Proof Research Carbon Sendero, 1-8 twist, 26" with Pierce Ti muzzle brake.
Precision Stockworks 'Rifleman" stock,
By McMillan carbon, edge fill, Right hand.
Jewell HVR trigger 1-1/2#
Murphy Precision 10 moa Ti scope rail.
Scope rail has been bedded to the action.
1 set of Hawkins 30mm long range hybrid rings, top ring bubble level.
PTG Rem style BDL bottom metal.
Harris Bipod w/pod lock installed.
Paint: Kryptek Typhon Camo Cerakote, by Branden at Custom Gun Coatings.
Rifle was built by Rhian (Bigngreen) at High Country Precision.
Metal Cerakote by Rhian, in Tungsten w/ black accents.
Whidden custom dies, neck bshng style sizer, & micrometer style seater
shoulder bump gage - Rhian built with the chamber reamer.
PTG chamber reamers, 1) HSS reamer & 1) Carbide reamer. with Go Gage
Montana Extreme cleaning rod.
Pelican 1750 hard case, with cut foam.
Norma Brass, 20 pcs. once fired to form,
515 pcs. "New" brass. That's a bunch!!!
500 Berger EOL 195gr. (100 of these are HBN coated)
Approx. 350 Hornady 180 ELDM.
Weight: Rifle is approx 6.7#
Rhian ran the 195's to 2880 during preliminary load work, with 64.0gr RE-26
Rifle shoots exceptionally well !!
(see attached photos)
may be able to get 2900-2950 with N570 ?
Fireforming loads shot tiny groups for me.
I also have Berger load data for 180 & 195's
"all ya need is primers & powder"
PRICE >>> $4500 Rifle accessories shipped insured to your FFL.
First "I'll take it" listed here or by pm or text conversation gets it. I'll go by time stamp to be fair.
I also have several more photos that wont load on here for some reason that I can text.
PM me with any questions.
there are a couple threads on this site regarding 7mm Blaser Mag. Search button.
Last edited by a moderator:
