Custom 264 win

[huntinfool18]

Custom 264 win mag built by ridge rifles in Casper, Wyoming in September 2019. Built on a trued and lapped rem 700 that has been slabbed and heavy fluted bolt, also a large bolt knob installed.
26" stainless Wilson match barrel #2 contour 8 twist. (Same barrels used by cooper and best of the west)
Bedded and floated in McMillan hunter stock with edge tech. ADL blind mag.
Shilen trigger set around 2lbs
Sitting on top is a huskemaw blue diamond 5-20x50 bought in September 2019 in Talley ultralight rings.
I had the chamber throated for the 156 Berger so it touches the lands at 3.500 which put the boat tail junction at the bottom of the case neck. And still runs in the mag box.
I have fired under 100rds out of this rifle, all with 156bergers and retumbo. First load I tried out of the gun shot half moa from the very first group. I didn't see any need to do any further load work.
Has one small rub mark on the barrel
I would like to sell at as turn key package for $2550 shipped to your ffl.

 

[browning442]

What velocity were you getting with the 156 EOL ?

 

[huntinfool18]

I got up to 3170 before I hit pressure. Load I used is running at 3120

 

[huntinfool18]

Typical groups. Could probably do better with some actual load work. Group with the single hole up and left was a bore sight shot and the very first group out of the rifle

 

[tim2446]

Typical groups. Could probably do better with some actual load work. Group with the single hole up and left was a bore sight shot and the very first group out of the rifle

what does it weight like it sits?

 

[huntinfool18]

I don't have a scale at the moment but if I remember correctly it was just under 9 lbs scoped. It's a fairly light weight set up