Cst Rem 700 LA Mag RUM Action/Recevr

[Zhomeguy]

Stainless "S" series Rem 700 Long Action Magnum, customized by LRI, with Darrel Hollands Long bolt handle Tig welded and correctly timed. Bolt release adjusted for longer travel, Wyatts MBE-extended mag center feed box capable of 4.0" long cartridges, with floor plate. PTG custom extended bottom metal for this set up. Blueprinted and Bolt was fluted and extractor installed. Materials and work in excess of 1200$
1000$ shipped to your FFL. No trades. Building a 300 Norma vs a 300 RUM.

 

[Zhomeguy]

Who needs a 300 RUM..this is the starting point...

 

[Zhomeguy]

Last day if interested, outta town for another 2 weeks..will repost again then when back in town...

 

[paulatherton21]

So this botton metal should work for the big 30 cal bullets coming out? And will fit 2 in box?

 

[Zhomeguy]

So this botton metal should work for the big 30 cal bullets coming out? And will fit 2 in box?

2 in the box for sure, you might get 3 with the deep canoe of the bottom metal but i'd check spring binding first...RUM cases are not as large in diameter as the PRC and Norma cases...the width of the action feed rail have adequate room for 300 PRC's. The feed lips of the Wyatts box need a bit of adjustment to perfectly nest under the feed
rails of the action.
All of a few minutes of tuneup by gunsmith in feed and function check.
Depending how far out your seating in a RUM 230's should be no problem but I have not heard anyone going past 3.95 on much of anything and this will handle that..
.

 

[Zhomeguy]

Any interest here guys? Offers,
Prefer barrel blanks, triggers, clean stocks, dont really need rifles, since I build them..maybe an o/u ...