Deputy819
Well-Known Member
Hey all. Honestly, I'm a little 'mixed' on the sale of this rifle, but I just don't think it's gonna be a good 'fit' for me here in my neck of the Kentucky woods. This thing needs to be out west somewhere (ideally) where it can really stretch out and show you what she's got. So, here goes. Savage 110 action (purchased on this forum) skim-bedded into a Bell & Carlson sporter style stock which wears a custom Kydex cheek riser (Punisher theme) from 'Matthews Fabrication'. Has Factory bottom metal and detachable magazine. Stainless NSS/Criterion 26" heavy-sporter contour barrel/1-9" twist with 150 documented rounds through it. NSS precision ground recoil lug and NSS squared/trued barrel nut. Rifle wears a Gen 1 Vortex Viper PST 6-24x50 (MOA) w/illumination capability. Scope is bedded into Talley Lightweight Rings and wears a Vortex bubble level. The whole rig weighs 10.2 lbs (bathroom scale). This rifle is a shooter folks. You can see the 200 yard 'confirmation group' I shot with it right before deer season last year (target pic) and it has just 1 deer to it's credit.....one shot/one kill. Rifle really loves H4831, Nosler brass, Federal 210M primers and Berger 168gr vld's seated .010 off the lands. The load I was using cranked out a very mild 2830 fps with a consistent ES under 10 and consistent .5moa (or better as seen in the target) groups at 200 yards. This rifle has been 'babied'....NOT pushed. A forum member here once told me (and I quote) "You could take some people's money with THAT thing 
". I added up the total parts cost of the build (minus the scope) and then deducted 20% for my selling price of $800.00 (BARE rifle only). I'd prefer to leave the scope/rings on the rifle (for now) so add $400.00 to the previous number for a COMPLETE RIFLE SALE PRICE of $1200.00. I also have the Redding Comp Type 'S' dies w/bushing, 21st Century expander mandrel die, 250 (or so) Berger 168gr vld's and 49 pieces of 3 times fired Nosler brass (1 piece was used to make a modified case that will be included) that can be purchased as well if interested. Brass was annealed after each firing and is all prepped and ready to go. I prefer PayPal F&F, but will try and accommodate other payment means for the REALLY interested folks that frown upon PayPal
. Will ship from my FFL to your FFL (I'll pay for that) to continental US only. Sorry this was so long-winded, but this rifle certainly deserves it. If I've forgotten anything just let me know. Thanks folks and stay safe/well!
". I added up the total parts cost of the build (minus the scope) and then deducted 20% for my selling price of $800.00 (BARE rifle only). I'd prefer to leave the scope/rings on the rifle (for now) so add $400.00 to the previous number for a COMPLETE RIFLE SALE PRICE of $1200.00. I also have the Redding Comp Type 'S' dies w/bushing, 21st Century expander mandrel die, 250 (or so) Berger 168gr vld's and 49 pieces of 3 times fired Nosler brass (1 piece was used to make a modified case that will be included) that can be purchased as well if interested. Brass was annealed after each firing and is all prepped and ready to go. I prefer PayPal F&F, but will try and accommodate other payment means for the REALLY interested folks that frown upon PayPal. Will ship from my FFL to your FFL (I'll pay for that) to continental US only. Sorry this was so long-winded, but this rifle certainly deserves it. If I've forgotten anything just let me know. Thanks folks and stay safe/well!
Last edited:
