coated bullets

rufous

Well-Known Member
Joined
Jul 17, 2001
Messages
174
Location
Walla Walla, WA
Have any of you used the "Ultralube" or "Acculube 10X" coated bullets available from Arizona Ammunition? They said that they are the same, they just changed the name to Acculube. Their web site is http://www.arizonaammunition.com/ACCULUBE%2010X.htm and they say that the coating will not come off the bullet like moly will. Clean the bore in the same manner as you would when using uncoated bullets. But you do not have as much copper fouling as with uncoated bullets so you do not have to clean as often. Supposedly you can also get somewhat higher velocities with the coated bullet since it reduces pressure. I have ordered some and will give them a try. Just wondered if any of you had tried them and if so what results? Rufous.
 
Warning! This thread is more than 23 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top