Case trimmer

[Lapuatom]

I've been trimming large numbers of brass as of late and I'm looking to upgrade case trimming equipment. Currently using rcbs trimmer w/ power unit, in conjunction with the power trim station. It does the job but it's slow. Looking for suggestions to upgrade to a better, faster unit. I reload for a dozen or so different cartridges. Thank you in advance for any advice.

 

[Coyote Shadow Tracker]

I've been trimming large numbers of brass as of late and I'm looking to upgrade case trimming equipment. Currently using rcbs trimmer w/ power unit, in conjunction with the power trim station. It does the job but it's slow. Looking for suggestions to upgrade to a better, faster unit. I reload for a dozen or so different cartridges. Thank you in advance for any advice.

HENDERSON!!!!!

 

[SDPlinker]

 

[DANNY-L]

I was trimming with the same setup as you and when you have a lot of brass it is for sure slow. Last year I bought one of these and it is fast. Just going steady I trimmed 100 270 wsm in 17 minutes.
Amazon product ASIN B0BZC9BCQT

 

[Coyote Shadow Tracker]

There are many Posts on "Trimmers" on LRH as well as the internet. LOTS of information.

Case trimmers

What`s everyone using for case trimmers? I have a Hornady and I have trouble with varying lengths? I set it for 2.840 for my 7mm STW cases, I take random measurements, some as short as 2.837, some long as 2.845? Is that normal , I realize that`s not much variation but not sure why I get even...

www.longrangehunting.com

See Post #9 and #39 from this link. We have a Henderson and modified it with our own power unit. We use Foster "3 Way Trimmer Heads" (think we have over a dozen caliber sizes now) so prep the Case Mouth all at once. Now Henderson makes his own 3 Way Trimmer heads.
You can read through all the reviews and pick the one to soot you needs. They can go for under $100 to $1,000.
Good luck. There is a lot of good and BAD trimmers out there.
I can only speak for what we bought and modified. ACCURATE & FAST.
If you want more information on the Trimmer we have just PM us.
Happy New Year
Len & Jill