Hugnot
Well-Known Member
Just got some:
Measured & weighed 10 of .224 blem 62 grain ELDVT
Measured & weighed 10, 73 224 ELDM ( not blems) for comparison
Measured & weighed 10, 80 243 ELDM VT (blems)
Measured & weighed 10, 107 Sierra MK's ( not blems) for comparison
Pics of all 4
Next -section .224 62's & .243 80's to see how much inner void, then,
Miller Sg estimates for plastic tip bullets for 9 twist .223, 7.7 twist .22-.250, 8 twist 6mm CM, & 10 twist 6mm AI then,
Shoot loads, chrony velocity, & groups @ 100. Look for funny not round bullet holes.
Shoot groups at 300.
I think good accuracy with low Sg Miller estimates as ELDVT bullets have .14 long plastic tips & internal voids comprising over 1/3 of bullet length. Don't know until I shoot groups & chrony velocities.
Measured & weighed 10 of .224 blem 62 grain ELDVT
Measured & weighed 10, 73 224 ELDM ( not blems) for comparison
Measured & weighed 10, 80 243 ELDM VT (blems)
Measured & weighed 10, 107 Sierra MK's ( not blems) for comparison
Pics of all 4
Next -section .224 62's & .243 80's to see how much inner void, then,
Miller Sg estimates for plastic tip bullets for 9 twist .223, 7.7 twist .22-.250, 8 twist 6mm CM, & 10 twist 6mm AI then,
Shoot loads, chrony velocity, & groups @ 100. Look for funny not round bullet holes.
Shoot groups at 300.
I think good accuracy with low Sg Miller estimates as ELDVT bullets have .14 long plastic tips & internal voids comprising over 1/3 of bullet length. Don't know until I shoot groups & chrony velocities.
Last edited:
