• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Barnes LRX 200 grn load for 300rum

Mossy49

Well-Known Member
Joined
Jul 21, 2012
Messages
100
Looked in Barnes manual and can't seem to find this type in there. Curious if anyone has loaded it for this caliber and how it shot. Any input is nice! Thanks.
 
Just did some load development for a friend using this bullet and the 300 rum. I found that 102.7 grains of Reloader 33 and this bullet seated at just a hair over factory OAL but still able to fill the internal mag, will put a ragged hole in a target at 100.

I did also shoot h100, retumbo, 7828ssc with all having good results. H1000 shot the best, but he had his mind made up with the 33.

Hope this helps
 
That's for the info, what were ya starting at for load. 102 grains of powder seems like quite a lot for a 200 grain bullet.
 
I started with 90 grains. I worked up .5 grains until I saw pressure signs. I saw the start of excessive pressure at 103 grains.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top