• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

AR-15 - 7mm WSSM

stirner

Well-Known Member
Joined
Mar 10, 2012
Messages
162
Location
Helena, Mt
Compete side-charged upper only, by JARD. 22" SS fluted Lilja bbl, and adjustable gas block. Redding comp dies w/micro seater and shell holder.
Approximately 700 ea 160 gr. Speer deep curl bullets.
50 ea fire-formed brass - annealed, neck turned and chamfered.
57 ea new 223 WSSM brass. 223 bullets added for fire-forming.
10 ea used cases.
1 ea 5 round ASC SS mag
1 ea 10 round ASC SS mag
The rifle is in good-excellent condition, with some dings around the port. The brass came from IQ Metals, with a "FC" headstamp. Because I hunt elk,. I chose the 160 gr Speer bullet. I get 2506 fps with an ES of13, and a SD of 7.4. A recent 5 shot group was 0.91". Load data will be furnished. It comes with a 5 day inspection period.
$500 plus S&H and insurance.
 

Attachments

  • IMG_1388.JPG
    IMG_1388.JPG
    1.7 MB · Views: 196
  • IMG_1389.JPG
    IMG_1389.JPG
    1.2 MB · Views: 198
  • IMG_1390.JPG
    IMG_1390.JPG
    1.4 MB · Views: 190
What's Twist Rate? Any extra dies for case forming?!
Sorry, I don't remember what twist I ordered, and I can't find anything on the bbl that shows it. I would imagine a 9 or 10. I haven't had a need for case forming dies, as the only brass I've found is .223 WSSM. So I just load that up with .223 bullets and fire form.
 
Top