wildcat westerner
Well-Known Member
- Joined
- Nov 14, 2009
- Messages
- 680
Hello,
I have been reloading since 1962 and neck turn, anneal case necks and measure powder charges to within .00, yet have run into a problem I cannot solve and does not seem rational to me.
I have had a 6.5x284 for over fourteen year. Its Krieger match barrel absolutely loves: Nosler 130 gr. Accubonds, 48.5 grains of H4831 sc, and Fed LR march primers for decades. I have fed it copious amounts of this loading and the barrel has now been set back to 25 inches. I have never lost a case to a loose primer situation and neck anneal every other loading.
Suddenly, in full length sizing I am having trouble closing the bolt, furthermore and much more vexing a fair amount of cases will not fit my shellholder for resizing. I do use a straight line seater, but cannot make any sense of resizing and case rims not fitting th shellholder in my RCBS press.
I,d really appreciate some knowledgeable experienced help in this challenge.
Thanks in advance,
I have been reloading since 1962 and neck turn, anneal case necks and measure powder charges to within .00, yet have run into a problem I cannot solve and does not seem rational to me.
I have had a 6.5x284 for over fourteen year. Its Krieger match barrel absolutely loves: Nosler 130 gr. Accubonds, 48.5 grains of H4831 sc, and Fed LR march primers for decades. I have fed it copious amounts of this loading and the barrel has now been set back to 25 inches. I have never lost a case to a loose primer situation and neck anneal every other loading.
Suddenly, in full length sizing I am having trouble closing the bolt, furthermore and much more vexing a fair amount of cases will not fit my shellholder for resizing. I do use a straight line seater, but cannot make any sense of resizing and case rims not fitting th shellholder in my RCBS press.
I,d really appreciate some knowledgeable experienced help in this challenge.
Thanks in advance,