7mm08 quickload help

  • Thread starter High_altitude_hunting
  • Start date
H

High_altitude_hunting

Guest
hello just wondering if anybody would be so kind to run this through quickload as its my pet load a little over hogden max

custom action
23" 1in 9.5 twist
remington brass
42.5 grains varget
col 2.800
nosler 140 grain accubond
cci br-2 primer

ive crono at 2820 just interested on quickload projected velocity and was worried on pressure as im a little over max am i still in sammi specs

any help appreciated

kris
 
Your brass, primers, bolt lift, etc would be a better indication.

Depending on many variables, it's possible to be unsafe below the published and QL Max. And, it's possible to be safe over the published and QL Max.

-- richard
 
cheers thanks for your help much appreciated
no issues with pressure bolt lift is normal primers and brass all ok i took it up to 43 grains and still had no issues but 42.5 produced best accuracy so im assuming this is a safe load in my rifle.

kris
 
Very sorry got that twist wrong just checked again and it's 1 in 10 twist all components still the same and bullets seated .03 from lands how much difference will twist have on pressure
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

Top