6mm xc

[LBEdgin]

Gentlemen
I'm picking up a 6mm xc very soon and have got brass and bullets on their way. Would anyone that runs one of these be kind enough to share some of your pet loads? I'm leaning toward the Seirra TMK 107gr bullets. But greatly thank you for your thoughts. Bullets, powders and also coal in order to have a good starting point.
Thank you in advance as I have gotten some good advice here in the past.
David

 

[Justice1327]

39.4-39.7 gr of H4350 with 107-115 gr bullet @ .20th off in a 1:7.5 twist.

 

[Justice1327]

Just found this in my files.

 

[Seabeeken]

N-150 shot .1 in my 6xc with 87 berger

 

[bullfrog]

I know everyone is going to say Varget is too fast burning for the 6XC, but that is what performs the best in my rifle. I use 36 grains with Berger 108, hornady 108, or sierra 107 with F205M primer. Seated .010 off the lands. Right at 3000 fps. Single digit ES and shoots awesome.

 

[LBEdgin]

Thanks everyone for your input, this will give me a heads start.

 

[Hydra6]

I used D Tubbs 115 DTAC of H4350 load for a long time with success. Later I tried 115DTACs over Varget for a "slower" load.