• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED 6.5 SAUM MHSA built rifle. Built on a stainless steel remington 700 long action/magnum bolt face with jeweled bolt.

schmi015

Well-Known Member
Joined
Jul 7, 2013
Messages
208
WTS my 6.5 SAUM MHSA built rifle. Built on a stainless steel remington 700 long action/magnum bolt face with jeweled bolt.

Chamber barrel 6.5 SAUM $400.00
1 Thread Barrel Thread Barrel Thread Muzzle of barrel 5/8x24 $175.00
1 Cerakote Barreled Action Cerakote Barreled Action Dark Green $350.00
.30 cal Brake for Thunderbeast CB series suppressor, 5/8-24 threads $125
Stock as configured Phoenix greyboe $800
Action was $400
Bartlein M24/M40 contour blank was $400 barrel is about 25inches long from recoil lug to where bullet exits.
Triggertech special $180
2xmags $90 each .338 lapua mags hold 5 rounds of 6.5saum and feed like butter with the lri feed blocks in, you can load em long.
Nightforce 20moa rail
This come out to$3010
Rounds Count is 160 and it shoots really well with 62 grains of H1000 and 130 bergers at 3213Fps.
Rifle did load dev and then shot the NF ELR Challenge in June of '23.
I can include 100 rounds of the above mentioned load if desired.

Selling/asking for $2500 cash, PayPal, Venmo, usps money order, bank check etc, we can work out other means or trades if necessary.

  • IMG_2955.jpeg
    IMG_2955.jpeg
    203.6 KB · Views: 118
  • IMG_2953.jpeg
    IMG_2953.jpeg
    189.3 KB · Views: 114
  • IMG_2952.jpeg
    IMG_2952.jpeg
    333.6 KB · Views: 115
  • IMG_2951.jpeg
    IMG_2951.jpeg
    444.7 KB · Views: 129
  • IMG_2950.jpeg
    IMG_2950.jpeg
    337.8 KB · Views: 137
  • IMG_2949.jpeg
    IMG_2949.jpeg
    368.4 KB · Views: 133
  • IMG_2948.jpeg
    IMG_2948.jpeg
    386.8 KB · Views: 164
  • IMG_2947.jpeg
    IMG_2947.jpeg
    425.6 KB · Views: 176
  • IMG_2946.jpeg
    IMG_2946.jpeg
    218.1 KB · Views: 174
1691420751587.png

1691420770629.png
 
Last edited:
Was this R700 action blue printed and or squared from the gunsmith??
Length of pull is adjustable and or remove the spacers??
 
Was this R700 action blue printed and or squared from the gunsmith??
Length of pull is adjustable and or remove the spacers??
It was not blue printed. It was a new action from Remington's new CNC machines in Alabama shortly before the company declared bankruptcy. I was told by the gunsmith that when they dialed it in that it didn't require printing. Length of pull is adjustable via the removable spacers. It shoots phenomenally.
 
Top