6.5 SAUM/Gap 4s

Zhomeguy

Well-Known Member
Joined
Aug 2, 2010
Messages
822
Location
Arizona
others havent sold so though was intent to keep this one she’s on the market...
Just built new n not shot..
6.5 Gap 4s (no turn neck an bit more freebore .120 to run the longer bullets 142 ELDs n the mythical Berger 155 VLDs) (std freebore is in the .081-.083 range for the 120s-130s)
Manners MCS-T Elite Carbon
Trued Rem 700 SA Receiver and a Tubbs bolt with benchrest bushed firing pin (smaller diameter ) and Speed Loc spring I believe its called)
Bartlein 3 at just under 26” in a factory fluted barrel
1-8 twist with threaded end/protector, also put an extended mag box from PTG/Wyatts style, with PTG BM (George at GA offered this for guys running the longer bullets and non-mag configurations..just had Dave at PTG make the same) Jewell trigger at 1lb, All cerakoted Charcoal and stock custom painted off FDE and Black / Titanium webbing...
Nice Mt Rifle in 6.5mm that will reach out there! 3250$ no tradesF94BEADF-E6ED-40C4-9CE9-433AC177162A.jpeg

D05F3D41-8F0E-4740-AE4F-A35ADC25B2F6.jpeg 3DE8A89A-A57B-499F-812D-4B56BDED743A.jpeg 6D11B172-40C9-4F5C-96EF-9F9E8191959F.jpeg
 
Last edited:

Zhomeguy

Well-Known Member
Joined
Aug 2, 2010
Messages
822
Location
Arizona
No GA Precision did not build this rifle..i’ve personally contracted to have it built by my gunsmith John Bredderman at Ragged Hole Barrels..
And to make a few corrections its a #3 fluted Bartlein to finish at .670 barrel diameter and just under 26”
 

Trending threads

Top