• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

6.5 SAUM/Gap 4s

Zhomeguy

Well-Known Member
Joined
Aug 2, 2010
Messages
2,282
Location
Arizona
others havent sold so though was intent to keep this one she's on the market...
Just built new n not shot..
6.5 Gap 4s (no turn neck an bit more freebore .120 to run the longer bullets 142 ELDs n the mythical Berger 155 VLDs) (std freebore is in the .081-.083 range for the 120s-130s)
Manners MCS-T Elite Carbon
Trued Rem 700 SA Receiver and a Tubbs bolt with benchrest bushed firing pin (smaller diameter ) and Speed Loc spring I believe its called)
Bartlein 3 at just under 26" in a factory fluted barrel
1-8 twist with threaded end/protector, also put an extended mag box from PTG/Wyatts style, with PTG BM (George at GA offered this for guys running the longer bullets and non-mag configurations..just had Dave at PTG make the same) Jewell trigger at 1lb, All cerakoted Charcoal and stock custom painted off FDE and Black / Titanium webbing...
Nice Mt Rifle in 6.5mm that will reach out there! 3250$ no trades
F94BEADF-E6ED-40C4-9CE9-433AC177162A.jpeg


D05F3D41-8F0E-4740-AE4F-A35ADC25B2F6.jpeg 3DE8A89A-A57B-499F-812D-4B56BDED743A.jpeg 6D11B172-40C9-4F5C-96EF-9F9E8191959F.jpeg
 
Last edited:
No GA Precision did not build this rifle..i've personally contracted to have it built by my gunsmith John Bredderman at Ragged Hole Barrels..
And to make a few corrections its a #3 fluted Bartlein to finish at .670 barrel diameter and just under 26"
 
Top