• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

6.5 prc, N565, and 143eldx load help

OG-danimal

Well-Known Member
Joined
Mar 15, 2022
Messages
312
Location
Bend
Anyone running this combo? If so what's your charge, velocity, and accuracy? I'll post back once I run my ladder test. Just looking for a place to start with my charge. I'm running adg brass and ccibr2 primers
 
I just tested the 140 and 147 ELDM's with N565. Good consistent velocities. I'm at 58.4gr N565 on the 140's. And 58gr. was too much pressure on the 147's. I would try 56.5, 57, 57.5 & 58gr and see how you end up.
 
I just tested the 140 and 147 ELDM's with N565. Good consistent velocities. I'm at 58.4gr N565 on the 140's. And 58gr. was too much pressure on the 147's. I would try 56.5, 57, 57.5 & 58gr and see how you end up.
Thank you!
 
best combo so far is 58 grains, cci br2, lapua case. Getting 2980 fps, single digit es and sub moa. I made it to 58.5 safely but the faster I push the eld-x worse accuracy gets.
 
Top