• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED 6.5 GAP 4s for sale

elkoholic72

Well-Known Member
Joined
Feb 9, 2009
Messages
396
Location
Laurel, Montana
GA Precision built 6.5 saum. 081 FB reamer. Built summer 2015. Cerakoted black.
Bartlien 22 inch #3 fluted 8.7 twist.
Manners EH 6 bedded by GA Precision and dipped in Kuiu pattern.
Vias muzzle brake.
Remington model 7 action trued by GAP.
Remington X mark trigger tuned and set by GAP.
Badger bolt knob and bottom metal. Badger 20moa scope rail.
1 Accurate 3 round mag included.
Atlas Bipod rail. Bipod NOT INCLUDED!
196 rounds fired, all Copper Creek loaded 140 Berger Hybrid. No ammo included. Shot CC ammo consistently under 1/2 moa.
Gun is perfect. Weighs 6 pound 11 Oz as shown without bipod.
Asking $3,475 shipped to your FFL. No trades please. $4,330 invested.
The reason for selling is it is my wife's gun and she has another build being finished this month by GA Precision in 6.5 GAP with Pierce Ti action and carbon fiber barrel identical to mine.
 

Attachments

  • 20160410_135040_resized.jpg
    20160410_135040_resized.jpg
    329.5 KB · Views: 77
  • 20160410_135047_resized.jpg
    20160410_135047_resized.jpg
    103.2 KB · Views: 62
  • 20160410_135100_resized.jpg
    20160410_135100_resized.jpg
    82.9 KB · Views: 66
  • 20160410_135109_resized.jpg
    20160410_135109_resized.jpg
    83.7 KB · Views: 56
  • 20160410_135120_resized.jpg
    20160410_135120_resized.jpg
    54 KB · Views: 53
  • 20160410_135134_resized.jpg
    20160410_135134_resized.jpg
    48.9 KB · Views: 54
Last edited:
Nice rifle. What kind of velocity are you seeing with the CC loads? Was wondering if you had seen much drop off in velocity with the 22 vs the 24 inch barrel.
 
did copper creek furnish you load data, in case you wanted to reload for it yourself??
 
I was shooting the 140 Berger Hybrids at 3060 towards the end of the last box of 50. In my original 24 inch gap with everything else being equal, velocity was usually 30-50 fps faster. We've had 4 of these now with a 5th on the way. 3 have 22 inch barrels. I got the ammo from copper Creek on a trade and needed to shoot it up for the brass, so my wife used them up since they shot so well.
I did shoot 5 shots through this recently with my load for my 24 inch proof barrel. 61 grains of 7977 210m primer rem 300 brass 143 eld X goes 3125 out of my 24 inch, shot 3056 out of the 22 inch barrel.
The 22 inch also shot my load of 130 Berger hybrid pointed and 62.7 h1000 very well. In fact, if we were keeping this rifle, that would probably be my starting point.
Just a quick note on the powder, I've switched to the imr enduron powders for the creedmoor and the gaps. Couldn't be happier. My 24 inch proof barreled gap is pushing 470 rounds through it since it's last cleaning without POI, group size, or velocity change. It is at a total of 2340 rounds through it and still hammers.
Ben
 
Last edited:
I was shooting the 140 Berger Hybrids at 3060 towards the end of the last box of 50. In my original 24 inch gap with everything else being equal, velocity was usually 30-50 fps faster. We've had 4 of these now with a 5th on the way. 3 have 22 inch barrels. I got the ammo from copper Creek on a trade and needed to shoot it up for the brass, so my wife used them up since they shot so well.
I did shoot 5 shots through this recently with my load for my 24 inch proof barrel. 61 grains of 7977 210m primer rem 300 brass 143 eld X goes 3125 out of my 24 inch, shot 3056 out of the 22 inch barrel.
The 22 inch also shot my load of 130 Berger hybrid pointed and 62.7 h1000 very well. In fact, if we were keeping this rifle, that would probably be my starting point.
Just a quick note on the powder, I've switched to the imr enduron powders for the creedmoor and the gaps. Couldn't be happier. My 24 inch proof barreled gap is pushing 470 rounds through it since it's last cleaning without POI, group size, or velocity change. It is at a total of 2340 rounds through it and still hammers.
Ben

Thanks Ben for the info. I am going to do a search about making brass etc, before I make any decisions.
 
If looking for brass, the Hornady brass is available off and on. I'll be switching to it shortly in 2 of my rifles. I'm running it a little slower, but it has been more consistent with zero prep work.
 
Top