375 SnipeTac Bertram Brass

[nchunter182]

I have 100 rounds of the Bertram 375 CheyTac bass that have been fire formed into 375 SnipeTac. All brass was annealed, primer pocket uniformed, flash hole de-burred and neck turned to get 80+% cleanup on the necks. Neck thickness mics .0125". 55 of the brass have been fire formed only using the inert filler method. This is evident (see pic) by the still slightly rounded shoulders as compared to the sharp shoulders on the 45 have been fired 2-3 times with a bullet and full power loads. My load was 137gr of Retumbo with the 350gr SMK. This is tough brass and all primer pockets are tight. Could be further necked down to 338 if you have a 338 SnipeTac or similar.
$200 shipped. PayPal F&F or USPS money order.
Thanks.
Jay