Seems interesting, don't know if the 6.5 rpm case can push big bullets but might be something for those who like the 338-06.
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
338 weatherby rpm
- Thread starter Dmagna
- Start date
Help Support Long Range Hunting Forum
KMLampson
Well-Known Member
Could be a fun cartridge, just wish that 6.5 rpm brass wasn't so expensive.
Ricky C
Well-Known Member
Hey, all the ballistic info on the 4 factory loads are on the Weatherby website
Take Care
Take Care
nvbowhunter
Member
Before Weatherby released this cartridge I built a rifle in a variation of this cartridge using a a Proof Research .338 Sendero CF in 1:9.4". I used a 6.5RPM reamer and then cut a custom neck and throat. I throated it to set a 250gr Berger Elite Hunter with the major diameter just forward of the neck/shoulder junction and have a .050" of jump. This defeats their purpose in this cartridge but fully suits my own needs. Using H100V it pushes the 250 @ 2940fps with an SD in the single digits. It's a long range hammer for sure. I call it the "338 Camp".
Not many new factory rifles get me as excited as this cartridge and rifle do. I have bought into the hype for sure. I have a 36M Omega that I got a deal on that was intended for a completely different setup but after hearing the stories with the .338 RPM and short barrels, I want one. It's cool to see Weatherby go out on a limb but with a very thought out item. I just want to know which model handles a suppressor better; the 18" #3 steel or the 20" carbon fiber barrel.
