.338 Norma AI load data

Your case capacity should be really close to a .338 RUM and slightly less than a .338 Edge. I would start with 338 RUM data starting low and working up.
 
Your case capacity should be really close to a .338 RUM and slightly less than a .338 Edge. I would start with 338 RUM data starting low and working up.

Thanks I will try that. I am fire forming some Norma Mags now for it, well once I get to the range.

What is the case capacity difference in the RUM and AI Norma Mag?
 
In my 30-338 Norma Imp I'm about 3-4 grains below a 300RUM (the same case as a Edge.) I didn't compare it to a 338 RUM but they are down about the same from a 338 Edge so you should be able to use 338 RUM data. The good thing is the Norma brass is better than the Remington RUM brass.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top