W WSMBUCK Active Member Joined Jan 23, 2011 Messages 40 Oct 19, 2011 #1 Just wanted to double check what size I need to finish my muzzle break ID of my 338 Edge build to, Thanks for any help
Just wanted to double check what size I need to finish my muzzle break ID of my 338 Edge build to, Thanks for any help
R rscott5028 Well-Known Member Joined Apr 18, 2010 Messages 2,608 Location Allen, TX Oct 19, 2011 #2 The brake ID should be .020" greater than bore diameter. .338+.020=.358" - is close to ideal It's not recommended that you go less and you really don't want to go more than .030" over. -- richard
The brake ID should be .020" greater than bore diameter. .338+.020=.358" - is close to ideal It's not recommended that you go less and you really don't want to go more than .030" over. -- richard
Help Support Long Range Hunting Forum
Help Support Long Range Hunting Forum
