SOLD/EXPIRED 308 LH Remington 700 BDL

[Jim’s Hunt]

LH Rem 700BDL with Hart barrel, jewel trigger,McMillan stock,Redding 3 die competition set,250Amax 168 gr bullets 150 rounds loaded amax/w 41.0gr IMR8208XBR FED. 210m primers and 8lb keg of 8208.
$1500.00 less powder $1300.00

 

[The Oregonian]

Pics? How does it shoot?

 

[Jim’s Hunt]

Pics? How does it shoot?

It shoot real well. I got it in an estate that I'm am the executor. I bore scoped it and the barrel is not washed out. I'm not at home right now and 5 hours away. I'll send pics Monday. Also the bolt face has been faced. It could use more ladder testing. It comes with a 20MOA PIC RAIL.

 

[Jim’s Hunt]

It shoot real well. I got it in an estate that I'm am the executor. I bore scoped it and the barrel is not washed out. I'm not at home right now and 5 hours away. I'll send pics Monday. Also the bolt face has been faced. It could use more ladder testing. It comes with a 20MOA PIC RAIL.

I'm

 

[Takman]

Barrel length, and weight please?

 

[Jim’s Hunt]

221/2" and 7 1/2 -8 lbs Sendero contour built by Dan Dowling in Grand Junction Colorado. As I said previously it belonged to a friend whom is now deceased. I have fired it and it does shot well but could use more testing

 

[Lrreloader]

What texture is on the barrel?

 

[Jim’s Hunt]

What texture is on the barrel?

I'm not quite sure what you would call it. But it is pretty cool looking to my eyes. I heard the builder uses a belt sander on it when he is spinning it in the lathe. I wish the pic did it better justice

 

[Lrreloader]

So like a custom jeweling so to say

 

[Jim’s Hunt]

So like a custom jeweling so to say

It's cool! I really like it I'm going to experiment with it on a take off barrel

 

[JAYgs8163]

With the swirl marks it looks like a vibrating sander was used while spinning it at a slower speed. Might make for a cool finish with a Cerakote afterwards also.

 

[Jim’s Hunt]

With the swirl marks it looks like a vibrating sander was used while spinning it at a slower speed. Might make for a cool finish with a Cerakote afterwards also.

Wouldn't Cerakote cove the pattern

 

[JAYgs8163]

Wouldn't Cerakote cove the pattern

It might slightly cover it where fine sand paper was used but I think a little rougher grit and then a cerakote like a "Sig Grey" may make for a very cool finish. Something to test for sure.

 

[bullet man]

thats nice