stanley52
Well-Known Member
I have a 700 LA with a badger recoil lug, Benchmark 1:8.5 fluted 25" barrel sendero contour in .260. Barreled action is cerakoted. Action was not trued. It was from one of Remington's XCR series rifles. I will part the action from the barrel, yes the pulled barrel will fit on a SA or LA 700, minor heads pacing may be needed, but doubtful. Only 200 rounds have been through the barrel. Additionally, the barrel was chambered with an extra inch on the shank, so this barrel could be bought and re chambered no problem for another action other than a standard SA/LA 700 (a blueprinted action or custom action and in another caliber if you so choose).
-will part action from barrel
-trigger not included
-scratch on one side that does not go through the cerakote.
-$400 for the SS LA
-$200 for the barrel
-$575 for the whole thing
-I have matching cerakoted BDL Bottom metal that can be negotiated for.
[email protected]
620-687-5680
Or PM here
-will part action from barrel
-trigger not included
-scratch on one side that does not go through the cerakote.
-$400 for the SS LA
-$200 for the barrel
-$575 for the whole thing
-I have matching cerakoted BDL Bottom metal that can be negotiated for.
[email protected]
620-687-5680
Or PM here